Scanner Driver Settings - Sharp AR-5516 Operation Manual

Scanner driver settings

The scanner driver setup screen consists of the "Set-up screen", which lets you select scan settings, and the
"Preview screen", which shows the scanned image. For details on the scan settings, click the "Help" button in the
preview screen to display Help.
Set-up screen
1
"Scanning Source" menu
Select the location where the original is placed.
Selections are "Platen" (document glass), "SPF
(Simplex)", "SPF (Duplex-Book)" or "SPF
(Duplex-Tablet)".
"SCANNING FROM A TWAIN-COMPLIANT
APPLICATION" (p.49)
2
Scan side menu
If you placed a two-sided original in the RSPF,
select "Right edge is fed first" or "Top edge is fed
first" from the scan side menu according to the
orientation of the placed original.
3
"Scanning Mode" menu
Select "Standard" or "Professional" for the
scanning mode. For details on the settings, click
the "Help" button in the preview screen to display
Help.
4
"Zoom Preview" Checkbox
When this is selected, the selected part of the
preview image will be enlarged when the "Preview"
button is clicked. To return to the regular view,
remove the checkmark.
Note "Zoom Preview" can be used when "Platen" is
selected in the "Scanning Source" menu.
1
2
3
4
5
6
7
5
"Preview" button
Previews the document.
If "Preview" is cancelled by immediately
Note
pressing the [Esc] key on your keyboard, or
the [CLEAR] key (
( ) on the machine, nothing will appear in
the preview screen.
6
"Scanning" button
Click to scan an original using the selected
settings. Before clicking the "Scanning" button,
make sure the settings are correct.
To cancel a scanning job after clicking the
Note
"Scanning" button, press the [Esc] key on
your keyboard, or the [CLEAR] key (
[CLEAR ALL] key (
7
"Close" button
Click to close the scanner driver setup screen.
SCANNER FUNCTIONS
) or [CLEAR ALL] key
) or
) on the machine.
51
4