Basic Printing; Contents - Sharp AL-1530CS Online Manual

2

Basic Printing

This is a printing example using WordPad to print a document onto letter size paper.
1
Start WordPad, make a new file, and enter the text
you intend to print.
2
Select "Print" from the application's "File" menu.
3
Make sure that "SHARP AL-XXXX" (where XXXX is the model
name of your unit) is selected as the current printer. If you
intend to change any print setting, click the "Preferences"
button to open the printer driver setup screen.
On Windows 95/98/Me/NT 4.0, click the "Properties" button.
Identify the current printer
1
in this box.
Click this button to change
2
any print preference.
Reference: Printer Driver Settings,
Printed Image to the
One Page, Two-sided Printing (AL-1551CS only)
Windows 2000 does not have the "Preferences"
button on this dialog box. Switch to the desired
tab by clicking it to specify printer settings.
Note
Click here.
Printing a Watermark, Fitting the
Paper, Printing Multiple Pages on
4
Click the "Print" button in the "Print" dialog box.
On Windows 95/98/Me/NT 4.0, click the "OK" button.
Click here.
Printing starts according to your preferences.
If you are using the single bypass (AL-1530CS/
1540CS), wait until the single bypass indicator blinks
after "P" blinks in the unit display, and insert the sheet of
paper in the single bypass.
Reference: See "BYPASS FEED (including special paper)" in the
Operation Manual for more details on inserting paper.

CONTENTS

3
INDEX