Scanner Driver Settings - Sharp MX-M232D Operation Manual

SCANNER FUNCTIONS

Scanner driver settings

The scanner driver setup screen consists of the "Set-up screen", which lets you select scan settings, and the
"Preview screen", which shows the scanned image. For details on the scan settings, click the "Help" button in the
preview screen to display Help.
Set-up screen
"Scanning Position" menu
1
("Scanning Source" in some regions)
Select the location where the original is placed.
Selections are "Platen" (document glass), "SPF
(Simplex)", "SPF (Duplex-Book)" or "SPF
(Duplex-Tablet)".
On machines without an SPF/RSPF, this
Note
setting is fixed at "Platen".
"Scanning Mode" menu
2
Select "Preset" or "Custom Settings" ("Standard"
or "Professional" in some regions) for the scanning
mode.
The "Preset (or Standard)" screen lets you select
the original type as well as monitor, photo, fax, or
OCR according to the purpose of scanning.
If you wish to change the default settings for these
four buttons, or select custom settings such as the
image type and resolution before scanning, switch
to the "Custom Settings (or Professional)" screen.
For details on the settings, click the "Help" button
in the preview screen to display Help.
"Image Area" menu
3
Set the scanning area. To scan the original size
detected by the machine, select "Auto". The
scanning area can also be specified as desired in
the preview window.
77
1
2
3
4
5
6
7
"Zoom Preview" checkbox
4
When this is selected, the selected part of the
preview image will be enlarged when the "Preview"
button is clicked.
To return to the regular view, remove the checkmark.
[Zoom Preview] cannot be used when [SPF]
Note
is selected in the "Scanning Position" menu.
"Preview" button
5
Previews the document.
If [Preview] is canceled by immediately
Note
pressing the [Esc] key on your keyboard, or
the [C] key (
machine, nothing will appear in the preview
screen.
"Scan" button
6
("Scanning" in some regions)
Click to scan an original using the selected
settings. Before clicking the "Scan" button, make
sure the settings are correct.
To cancel a scanning job after the "Scan"
Note
button is clicked, press the [Esc] key on your
keyboard or the [C] key (
( ) on the machine.
"Close" button
7
Click to close the scanner driver setup screen.
) or [CA] key ( ) on the
) or [CA] key