Error #A1-1210 Call For Service - Samsung CLP-680 Series Service Manual

► Error Code
A1-1210
► Error message

Error #A1-1210 Call for service

► Symptom
The fuser motor does not operate. / The fuser motor is operating but is recognized as stop status.
► Troubleshooting method
1) Turn the machine off then on. If the error persists, turn the machine off again.
2) Remove the rear and right cover.
3) Check if there are any obstacles or paper around the fuser unit.
4) Check if the connection between main board and fuser motor are correct.
5) If the connection is OK, replace the fuser motor.
6) If the problem persists, replace the main board.
Copyright© 1995-2013 SAMSUNG. All rights reserved.
4. Alignment and Troubleshooting
4-29