Omron ZX-L-N Manual page 6

■ Calculating Unit
Item
Applicable Amplifier Units
Current consumption
Ambient temperature
Ambient humidity
Connection method
Dielectric strength
Insulation resistance
Vibration resistance (destructive)
Shock resistance (destructive)
Materials
Weight (packed state)
■ ZX-series Communications Interface Unit
Item
Current consumption
Applicable Amplifier Units
Applicable Amplifier Unit versions
Max. No. of Amplifier Units
Communications Communications
functions port
Communications
protocol
Baud rate
Data configuration
Indicators
Protective circuits
Ambient temperature
Ambient humidity
Insulation resistance
Dielectric strength
Materials
Accessories
* Contact your OMRON representative for CompoWay/F communications specifications.
ZX Series (ZX-L-N)
6
ZX-LDA11-N/41-N/ZX-EDA11/41/ZX-TDA11/41
12 mA max. (supplied from the Smart Sensor Amplifier Unit)
Operating: 0 to 50°C, Storage: −15 to 60°C (with no icing or condensation)
Operating and storage: 35% to 85% (with no condensation)
Connector
1,000 VAC, 50/60 Hz for 1 min
100 MΩ (at 500 VDC)
10 to 150 Hz, 0.7-mm double amplitude 80 min each in X, Y, and Z directions
2
300 m/s 3 times each in six directions (up/down, left/right, forward/backward)
Display: Acrylic, Case: ABS resin
Approx. 50 g
60 mA max. (supplied by the Amplifier Unit)
ZX Series
ZX-LDA@1-N Ver. 2.100 or higher
ZX-EDA@1 Ver. 1.100 or higher
ZX-TDA@1 Ver. 1.000 or higher
5 (max. 2 with calculating unit)
RS-232C port (9-pin D-Sub Connector)
CompoWay/F*
38,400 bps
Data bits: 8, Parity: none, Start bits: 1, Stop bits: 1, Flow control: none
Power supply: green, Sensor communications: green, Sensor communications error: red, Exter-
nal terminal communications: green, External terminal communications error: red
Reverse polarity protection
Operating: 0 to 50°C, storage: −15 to 60°C (with no icing or condensation)
Operating and storage: 35% to 85% (with no condensation)
20 MΩ min. (at 500 VDC)
1,000 VAC, 50/60 Hz for 1 min, Leakage current: 10 mA max.
Case: PBT (polybutylene terephthalate), Cover: Polycarbonate
Instruction sheet, 2 clamps
Smart Sensors (Laser Type)
ZX-CAL2
ZX-SF11