Omron ZX-L-N Manual page 4

■ Sensor Heads (Through-beam)
Item Model
Optical system Through-beam
Light source Visible-light semiconductor laser with a wavelength of 650 nm
(wave length)
EN class 1, FDA class II
Maximum output 0.2 mW max.
Measurement width 1-mm dia.
Measurement 0 to 500 mm
distance
Minimum sensing 8-μm dia.
object (opaque)
4 μm *2
Resolution*1
±0.2% FS/°C
Temperature
characteristic
Ambient illumination Incandescent lamp: 10,000 l× max. (on light-receiving side)
Operating: 0 to 50°C, Storage: −25 to 70°C (with no icing or condensation)
Ambient temperature
Ambient humidity Operating: 35% to 85% (with no condensation)
Degree of protection IEC60529, IP40
Connection method Connector relay (standard cable length: 500 mm)
Weight (packed state) Approx. 220 g
Cable length Extendable up to 10 m with special extension cable.
Materials Case Polyetherimide
Cover Polycarbonate
Front filter Glass
Tightening torque 0.3 N⋅m max.
Accessories Instruction sheet, Sensor Head-Amplifier Connection Cable
Optical axis adjustment seal
*1. This value is obtained by converting the deviation (±3σ) in the linear output that results when the sensor head is connected to the amplifier unit,
into the measurement width.
*2. For an average count of 64. The value is 5 μm for an average count of 32.
This is the value that results when a minimum sensing object blocks the light near the center of the 1-mm measurement width.
*3. For an average count of 64. The value is 5 μm for an average count of 32.
*4. For an average count of 64. The value is 15 μm for an average count of 32.
ZX Series (ZX-L-N)
4
ZX-LT001
0.35 mW max.
1- to 2.5-mm dia. 5 mm
500 to 2,000 mm 0 to 500 mm
8- to 50-μm dia. 0.05-mm dia. (opaque)
(opaque)
4 μm *3
---
Smart Sensors (Laser Type)
ZX-LT005 ZX-LT010
10 mm
0.1-mm dia. (opaque)
ZX-LT030
0.2 mW max.
30 mm
0.3-mm dia. (opaque)
12 μm *4
±0.3% FS/°C
Approx. 450 g
Zinc die-cast
Mounting Bracket