Steps
1. Adhere the coin-cell battery to the slot on the palm-rest assembly.
2. Route the coin-cell battery cable through the routing guides on the palm-rest assembly.
3. Connect the coin-cell battery cable to the connector on the system board.
Next steps
1. Install the
base
cover.
2. Follow the procedure in
Keyboard assembly
Removing the keyboard assembly
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
3. Remove the
3-cell battery
4. Remove the
WLAN
card.
5. Remove the
WWAN card
6. Remove the
M.2 2280 SSD
7. Remove the fan.
8. Remove the
system
board.
62
Removing and installing components
after working inside your
before working inside your
or
4-cell
battery.
(optional).
or
M.2 2230
SSD.
computer.
computer.