Table of Contents
Advertisement
2. Install the
display
bezel.
3. Install the
display
assembly.
4. Install the
3-cell battery
5. Install the
base
cover.
6. Follow the procedure in
eDP cable
Removing the eDP cable
Prerequisites
NOTE:
The eDP cable removal procedure is applicable only for Latitude 5330 laptop and not for the 2-in-1 configuration.
1. Follow the procedure in
2. Remove the
base
cover.
3. Remove the
3-cell battery
4. Remove the
display
assembly.
5. Remove the
display
bezel.
6. Remove the
display
hinges.
7. Remove the
display
panel.
About this task
The following images indicate the location of the eDP cable and provide a visual representation of the removal procedure.
or
4-cell
battery.
after working inside your
before working inside your
or
4-cell
battery.
computer.
computer.
Removing and installing components
97
Advertisement
Table of Contents
