Chapter 2: Removing And Installing Components; Recommended Tools; Screw List - Dell Latitude 5330 2in1 Service Manual

Table of Contents

Advertisement

Removing and installing components
NOTE:
The images in this document may differ from your computer depending on the configuration you ordered.

Recommended tools

The procedures in this document may require the following tools:
● Phillips screwdriver #0
● Plastic scribe

Screw list

NOTE:
When removing screws from a component, it is recommended to note the screw type, the quantity of screws, and
then place them in a screw storage box. This is to ensure that the correct number of screws and correct screw type is
restored when the component is replaced.
NOTE:
Some computers have magnetic surfaces. Ensure that the screws are not left attached to such surfaces when
replacing a component.
NOTE:
Screw color may vary with the configuration ordered.
Table 1. Screw list
Component
Base cover
WLAN
WWAN
M.2 2230 solid-state drive
M.2 2280 solid-state drive
3-cell battery
4-cell battery
Heat sink-integrated
System fan
USB Type-C support bracket
System board
10
Removing and installing components
Screw type
Captive screw
M2x3
M2x3
M2x2.5
M2x2.5
M2x4.5 (captive screw)
M2x4.5 (captive screw)
Captive screw
M2x3
M2x5
M2x3
M2x2.5
Quantity
8
1
1
2
2
3
3
4
3
3
2
2
Screw image
N/A
N/A
N/A
N/A
2

Advertisement

Table of Contents
loading

This manual is also suitable for:

Latitude 5330P138gP139g

Table of Contents