Omega Engineering CYD201 Operator's Manual page 35

OMEGA Model CYD201/CYD208 User's Manual
WS
Sample Sensor Reading and Alarm Status.
Input:
WS
Returned: For a Model CYD201, returns:
[sign],[sensor reading],[units],[alarm status] (CR)(LF)
For a Model CYD208, returns:
[current channel],[sign],[sensor reading],[units], [alarm
status](CR)(LF)
Remarks: Returns the sample sensor reading and alarm status, where
A = active and I = inactive.
WY
Scan Status (Model CYD208 Only).
Input:
WY
Returned: [scan status],[current channel number],[channel which
caused the alarm state], [channel 1 dwell time],[channel 2
dwell time],...[channel 8 dwell time](CR)(LF)
Remarks: Returns instrument scan status (scanning or holding),
channel dwell information, and scan position. Scan Status
Parameter: H = holding, S = scanning. Channel Which
Caused the Alarm State Parameter = 1 through 8 or "-" if
alarm is inactive. Channel dwell times are in seconds.
Sending this command with a Model CYD201 returns N to
signify no scanner.
Remote Operation 4-7