Sensor Curve Definition; Rack Mounting - Omega Engineering CYD201 Operator's Manual

Table of Contents

Advertisement

OMEGA Model CYD201/CYD208 User's Manual
2.6

SENSOR CURVE DEFINITION

To display accurate temperature, select a response curve that matches the
installed sensor. There are seven standard curves stored within the Model
CYD201/CYD208 numbered 0 through 6 (see Appendix A). Different curves
may be assigned to each channel of the Model CYD208. Find the unit
factory curve configuration inside the front cover of this manual. Curve 6
(CY-7 Curve 10) is the standard curve configuration unless specified
differently upon order.
To determine current curve selection, press and hold UNITS and turn on (1)
the rear panel SET switch (DIP switch 3). Release UNITS key. The CYD201
displays the curve number in the display window. The Model CYD208
displays the curve number in the display window and the channel number in
the channel window. To display curves for other channel numbers in the
Model CYD208, press CHANNEL to scroll through the eight channels.
To change the curve, press UNITS. The instrument scrolls through curves 0
through 6. In the Model CYD208, press CHANNEL to select other channels,
then press UNITS to scroll through the curves.
After the new curve selection, turn the SET switch on the rear panel off (0).
The unit returns to normal operation.
Table 2-2. Model CYD201/CYD208 Temperature Curves
Curve No.
0
1
2
3
4
5
6
2.7

RACK MOUNTING

The Models CYD201 and CYD208 can install in a standard "size" 1/4 panel
EIA rack space. If you ordered a CYD208-DIN rack mounting adapter, follow
the installation instructions below. See Figure 2-3.
1. Remove front feet on bottom of unit and attach lower rack piece by
threading two of the four screws provided into the front feet holes.
2. Locate the two mounting hole access covers on the top of the unit.
Attach the other rack with the remaining screws.
Installation
Range (K)
0 – 324.9
0 – 324.9
0 – 324.9
0 – 324.9
0 – 324.9
0 – 324.9
0 – 474.9
Description
DT-500DI-8B
DT-500DI-8A
DT-500DRC-D
DT-500TDC-E1
CTI Curve C
DT-500DI-8C
CY-7 Curve 10
2-7

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cyd208

Table of Contents