Operation; General; Units Key; Model Cyd201 Front Panel - Omega Engineering CYD201 Operator's Manual

OMEGA Model CYD201/CYD208 User's Manual
3.0

GENERAL

This chapter covers the Units Key (Paragraph 3.1), the Channel key
(Paragraph 3.2), Scan Mode (Paragraph 3.3), Setting Dwell Times
(Paragraph 3.4), Alarm Operation (Paragraph 3.5), SoftCal™
Compensations (Paragraph 3.6), Calibration (Paragraph 3.7), Verifying
SoftCal™ Operation (Paragraph 3.8), and Erasing SoftCal™
Compensations (Paragraph 3.9).
3.1

UNITS KEY

UNITS selects different units of measurement. The thermometer reads in
voltage or temperature (°C, °F, or K). Press UNITS to scroll through the
various selections.
UNITS also determines if SoftCal™ is active. Press and hold UNITS for
3 seconds. If SoftCal™ is not active, -000- appears in the display.

Operation

CHAPTER 3
OPERATION
ON
OFF
Figure 3-1. Model CYD201 Front Panel
ON
OFF
CYD208 THERMOMETER
Figure 3-2. Model CYD208 Front Panel
K °C
UNITS
V °F
CYD201 THERMOMETER
K °C
UNITS
V °F
CHANNEL
3-1