Starting The Programme; Child Lock - Beko WMB 51032 PL PTY User Manual

Operating the product
1. Open the loading door, place the laundry and put
detergent, etc.
2. Select the washing programme, temperature,
spin speed and, if required, the auxiliary
functions.
3. Set the desired time by pressing the Delayed
Start button.
4. Press Start / Pause button. The delayed start
time you have set is displayed. Delayed start
countdown starts. "_" symbol next to the
delayed start time moves up and down on the
display.
C
Additional laundry may be loaded during
the delayed start period.
5. At the end of the countdown, duration of
the selected programme will be displayed.
"_" symbol will disappear and the selected
programme will start.
Changing the Delayed Start period
If you want to change the time during countdown:
1. Press Delayed Start button. Time will increase by
1 hour each time you press the button.
2. If you want to decrease the delayed start time,
press Delayed Start button repeatedly until
the desired delayed start time appears on the
display.
Canceling the Delayed Start function
If you want to cancel the delayed start countdown
and start the programme immediately:
1. Set the Delayed Start period to zero or turn the
Programme Selection knob to any programme.
Thus, Delayed Start function will be canceled.
The End/Cancel light flashes continuously.
2. Then, select the programme you want to run
again.
3. Press Start / Pause button to start the
programme.
Washing Machine / User's Manual

5.11 Starting the programme

1. Press Start / Pause button to start the
programme.
2. Programme follow-up light showing the startup
of the programme will turn on.
C
If no programme is started or no key is
pressed within 1 minute during programme
selection process, the machine will switch
to Pause mode and the illumination level
of the temperature, speed and loading
door indicator lights will decrease. Other
indicator lights and indicators will turn off.
Once the Programme Selection knob is
rotated or any button is pressed, indicator
lights and indicators will turn on again.

5.12 Child Lock

Use Child Lock function to prevent children from
tampering with the machine. Thus you can avoid
any changes in a running programme.
C
If the Programme Selection knob is
turned when the Child Lock is active,
"Con" appears on the display. The
Child Lock does not allow any change
in the programmes and the selected
temperature, speed and auxiliary functions.
C
Even if another programme is selected
with the Programme Selection knob while
the Child Lock is active, previously selected
programme will continue running.
To activate the Child Lock:
Press and hold 1 and 2
st
buttons for 3 seconds. The lights on the 1
2 Auxiliary Function buttons will flash, and
nd
"C03", "C02", "C01" will appear on the display
respectively while you keep the buttons pressed for
3 seconds. Then, "Con" will appear on the display
indicating that the Child Lock is activated. If you
press any button or turn the Programme Selection
knob when the Child Lock is active, same phrase
will appear on the display. The lights on the 1st
and 2nd auxiliary function buttons that are used to
deactivate the Child Lock will blink 3 times.
Auxiliary Function
nd
and
st
65 / EN