For The Installer: Final Check List - Scotsman MDT6N90 Service Manual

MDT6N90

FOR THE INSTALLER: Final Check List

1. Is the icemaker-dispenser installed
ELECTRICAL?
indoors, in a location where the air and
LEVELED?
water temperatures are controlled, and
where they do not go beyond design
limitations?
2. is there an electrical service
disconnect within sight of the installed
machine? Is the machine on a separate
circuit? Has the voltage been checked
and compared to nameplate
requirements?
3. Have all of the plumbing connections
been made and checked for leaks?
4. Has the machine been leveled?
5. Is there a minimum of 6 inches of
clearance at the left and right sides of an
air cooled machine?
6. Is there a minimum of 6 inches of
clearance at the top and back of the
machine for service and utility
connections?
7. Is there a water shut off valve installed
near the machine?
WATER
INLET?
8. Have all of the shipping blocks been
removed?
DRAINS?
May 2001
Page 6