For The Installer: Specifications; Back View - Scotsman MDT6N90 Service Manual

MDT6N90

FOR THE INSTALLER: Specifications

This ice maker-dispenser is designed to be
mounted on a machine stand, or a countertop.
Before beginning the installation, check that all the
materials and kits required are available at the
installation location.
Scotsman Ice Systems are designed and
manufactured with the highest regard for safety
and performance. They meet or exceed the
standards of U.L., N.S.F., and C.U. L.
3/8" FPT
Cond. Water
Inlet
(W/C)
1/2" FPT
Cond. Drain
(W/C)
.75"
3/4" FPT
Drain
Model Number Model
Series
MDT6N90AS-1 A or B 45.74 x 35.18 x 29.26 Air
MDT6N90WS-1 A
MDT6N90WS-1 B
*Minimum circuit ampacity is used to determine wire size and type per National Electric Code.
Options: Machine stand DMS31. Portion control kit KPC-MDT.
3/4 FPT
Drain
3.84"
5.59"
17.59"
Dimensions
(w/o stand)
H" x W" x D"
same
same
Scotsman assumes no liability or responsibility of
any kind for products manufactured by Scotsman
that have been altered in any way, including the
use of any parts and/or other components not
specifically approved by Scotsman.
Scotsman reserves the right to make design
changes and/or improvements at any time.
Specifications and designs are subject to change
without notice.

BACK VIEW

Electrical Junction
Box
3/8" Flare
Water Inlet
6.63"
12.5"
4.63"
7.93"
2.63"
Condenser Refrigerant
Type Charge
(R-404A)
32
Water 22
Water 19
June 2002
Page 2
Water Limitations:
An ice machine is a food
manufacturing plant; it takes in
a raw material, water, and
turns it into a food product,
ice. The purity of the water is
very important in obtaining
pure ice and in maximizing
product life.
General recommendations
are:
1. Filter the water used to
produce ice.
2. Check with a water
treatment specialist for a water
test, and any
recommendations regarding
filters and treatment.
Basic Minimum
Electrical Circuit
Ampacity*
115/60/1 18.1
same 16.5
same 16.5
Max.
Fuse
Size
25
20
20