Component Description - Scotsman MDT6N90 Service Manual

MDT6N90

COMPONENT DESCRIPTION

RESERVOIR
ICE LEVEL SENSOR
EVAPORATOR
DRAIN
TUBE
Control Box: Contains the electrical controls that
operate the machine.
High Pressure Cut Out Switch: An automatic
reset switch sensing the high side refrigeration
pressure. It is set to shut the machine off if the
discharge pressure should ever exceed 450 psig.
Evaporator: A vertical stainless steel tube,
refrigerated, and water filled. In it there is a
stainless steel auger.
Reservoir: Float operated, it maintains the water
level in the evaporator at a constant level, it also
contains the water level sensor.
Water Level Sensor: Senses if there is water in
the reservoir to make ice out of. Will shut the
machine off it there is none.
WATER
LEVEL
SENSOR
HI
Ice Level Sensor: An electronic "eye", it senses
PRESSURE
the presence of ice in the bottom of the ice
CUT OUT
discharge chute. Operates to turn the ice machine
on and off automatically as the level of ice in the
bin changes.
Drain Tube: When uncapped and lowered, drains
the evaporator.
Condenser: Air or water cooled, where the heat
removed in ice making is discharged.
Ice Storage Bin Assembly: A plastic lined,
insulated cylinder that receives, stores and
dispenses the ice. Fresh ice enters at the top, and
when the bin is full enough the ice will be between
the ice level sensors, and the icemaking will stop.
Ice is dispensed through a chute at the bottom
front when the agitator assembly sweeps the ice
through the chute.
May 2001
Page 8
ICE STORAGE BIN
CONDENSER
CONTROL BOX