For The Installer: Specifications - Scotsman TDE550 Service Manual

TDE550 & TDE650

FOR THE INSTALLER: Specifications

This ice maker-dispenser is designed to be
mounted on a machine stand, or a countertop, or
using wall mounting kit KWB3, hung from a wall.
The sink may be retained, or removed and the
optional longer splash panel (KSP2) installed in
place of the original. Instructions for each kit are
included in this service manual.
20.5"
22.5"
SPECIFICATIONS
Model Number Dimensions
(w/o stand)
H" x W" x D"
TDE650AE-1A 48.5 x 26 x 22.5
TDE650WE-1A
TDE650AE-6A
TDE650WE-6A
TDE550AE-1A 41 x 26 x 22.5
TDE550WE-1A
TDE550AE-6A
TDE550WE-6A
+ Minimum Circuit Ampacity is used to figure wire size and type per National Electric Code.
14.06"
Optional for water and
drain lines
Serial Number Plate
inside on upper base
Ice
Type
NUGGET
same same
same same
same same
same
same same
same same
same same
Before beginning the installation, check that all the
materials and kits required are available at the
installation location.
NAMEPLATE
on side panel
3.54"
4.5"
2.56"
3/8" FPT
condenser
Water Inlet
(Water Cooled)
1.88"dia
1/2" FPT
Cond. Drain
(Water Cooled)
3/4" FPT
Drain
Condenser Refrigerant
Charge
Type
(R-404A)
Air 24 ounces
Water 18 ounces
Air 24 ounces
Water 18 ounces
Air 24 ounces
Water 10 ounces
Air 24 ounces
Water 10 ounces
August 1999
Page 2
ELECTRICAL JUNCTION BOX
3/8" Flare
Potable Water Inlet
12.27"
3.12"
1.12"
Basic Minimum
Electrical Circuit
Ampacity+
115/60/1 19.3
115/60/1 17.8
230/50/1 n/a
230/50/1 n/a
115/60/1 19.3
115/60/1 17.8
230/50/1 n/a
230/50/1 n/a
5.12"
6.43"
Maximum
Fuse
Size
25
20
n/a
n/a
25
20
n/a
n/a