6.5.3
Raised cup grilles
If there is a need to use cups of different heights, it is possible
to use the special raised grilles (14) supplied with the machine.
13
14
12
To use them, hook them to the cup support grid (13) in corre-
spondence with the respective filter holder (12).
When they are no longer needed, remove them from the sup-
port grid.
The diagram below shows the useful heights for cups with and
without riser grille.
83
mm
USER manual
14
12
138
mm
6.5.4
Cup warmer
For safety reasons, we do not recommend placing
cloths or other objects on the cup warmer shelf in or-
der to prevent the machine from overheating.
HIGH TEMPERATURE HAZARD: the cup warmer can
reach temperatures that may cause burns. Be very
careful.
Place the cups to be heated on the cup heater (7)
Turn ON the switch
of the service button panel (6).
It is recommended to turn off the device when not
needed.
Pay attention to the position of the switch when using
the device (see diagram below)..
Cup Warmer
Cup Warmer
WBAR
7
6
OFF
ON
37
di
160