Installation - VTech Analog Classic Series User Manual

Installation

Telephone base installation
Installation option - desktop position
1. Turn the telephone base over with the
bottom side facing up. Insert the tabs
of the mounting bracket into the upper
grooves on the telephone base as shown
below. Then press the tabs and push the
mounting bracket into the lower grooves
on the telephone base until they lock
securely.
2. Install the telephone base as shown below.
Telephone
wall jack
Telephone line cord
If you have High Speed Internet
Access service, a DSL filter (not
included) is required.
Telephone line jack
EN - 7
Coiled handset
cord jack