Safety Instructions; Transportation; Battery - Axis 01107-004 User Manual

AXIS M5065 PTZ Network Camera

Safety instructions

Safety instructions
NOTICE NO NO TICE TICE
• The Axis product shall be used in compliance with local laws and regulations.
• Axis recommends using a shielded network cable (STP) CAT5 or higher.
• Use only applicable tools when installing the Axis product. Using excessive force with power tools could cause damage to
the product.
• Use only accessories that comply with the technical specification of your product. These can be provided by Axis or a third
party. Axis recommends using Axis power source equipment compatible with your product.
• Use only spare parts provided by or recommended by Axis.
• Do not attempt to repair the product yourself. Contact Axis support or your Axis reseller for service matters.

Transportation

NOTICE TICE
NO NO TICE
• When transporting the Axis product, use the original packaging or equivalent to prevent damage to the product.

Battery

Low battery power affects the operation of the RTC, causing it to reset at every power-up. When the battery needs replacing, a
log message will appear in the product's server report. For more information about the server report, see the product´s setup
pages or contact Axis support.
The battery should not be replaced unless required, but if the battery does need replacing, contact Axis support at axis.com/support for
assistance.
Lithium coin cell 3.0 V batteries contain 1,2-dimethoxyethane; ethylene glycol dimethyl ether (EGDME), CAS no. 110-71-4.
WARNING
• Risk of explosion if the battery is incorrectly replaced.
• Replace only with an identical battery or a battery which is recommended by Axis.
• Dispose of used batteries according to local regulations or the battery manufacturer's instructions.
7