Table of Contents
Advertisement
AXIS M50 PTZ Network Camera Series
Safety instructions
Safety instructions
NOTICE
NO
NO
TICE
TICE
• The Axis product shall be used in compliance with local laws and regulations.
• Axis recommends using a shielded network cable (STP).
• Use only applicable tools when installing the Axis product. Using excessive force with power tools could cause damage to
the product.
• Use only accessories that comply with the technical specification of your product. These can be provided by Axis or a third
party. Axis recommends using Axis power source equipment compatible with your product.
• Use only spare parts provided by or recommended by Axis.
• Do not attempt to repair the product yourself. Contact Axis support or your Axis reseller for service matters.
Transportation
NOTICE
TICE
NO
NO
TICE
• When transporting the Axis product, use the original packaging or equivalent to prevent damage to the product.
Battery
Low battery power affects the operation of the RTC, causing it to reset at every power-up. When the battery needs replacing, a log
message will appear in the product's server report. For more information about the server report, see the product´s web page or
contact Axis support.
Lithium coin cell 3.0 V batteries contain 1,2-dimethoxyethane; ethylene glycol dimethyl ether (EGDME), CAS no. 110-71-4.
WARNING
• Risk of explosion if the battery is incorrectly replaced.
• The battery should be replaced with an identical battery only.
• Used batteries should be disposed of according to local regulations or the battery manufacturer's instructions.
7
Advertisement
Table of Contents
