AXIS M5065 PTZ Network Camera
About wireless I/O (Z-Wave Plus
About wireless I/O (Z-Wave Plus
This is a security enabled Z-Wave Plus
Z-Wave Plus devices. The product can be operated in any Z-Wave network with compatible Z-Wave certified devices from other
manufacturers. To increase the network reliability, all non-battery operated Z-Wave devices in the network act as repeaters regardless
of vendor. This product acts as the control device and the Z-Wave devices added to it act as slaves.
Associations
•
This product supports one association group with group identifier = 1 (LifeLine).
•
Maximum number of devices that can be added to the association group = 1.
•
Group identifier 1 is used to send the Device Reset Locally report.
Command classes
This product supports the following command classes:
•
COMMAND_CLASS_ZWAVEPLUS_INFO
•
COMMAND_CLASS_TRANSPORT_SERVICE
•
COMMAND_CLASS_CRC_16_ENCAP
•
COMMAND_CLASS_APPLICATION_STATUS
•
COMMAND_CLASS_SECURITY_2
•
COMMAND_CLASS_SECURITY
•
COMMAND_CLASS_INCLUSION_CONTROLLER
•
COMMAND_CLASS_POWERLEVEL
•
COMMAND_CLASS_MANUFACTURER_SPECIFIC
•
COMMAND_CLASS_VERSION
•
COMMAND_CLASS_SUPERVISION
•
COMMAND_CLASS_ASSOCIATION
•
COMMAND_CLASS_ASSOCIATION_GRP_INFO
•
COMMAND_CLASS_DEVICE_RESET_LOCALLY
This product supports the following security command classes:
•
COMMAND_CLASS_SECURITY
•
COMMAND_CLASS_ NETWORK_MANAGEMENT_INCLUSION
•
COMMAND_CLASS_NETWORK_MANAGEMENT_BASIC
•
COMMAND_CLASS_NETWORK_MANAGEMENT_PROXY
•
COMMAND_CLASS_NETWORK_MANAGEMENT_INSTALLATION_MAINTENANCE
•
COMMAND_CLASS_MANUFACTURER_SPECIFIC
•
COMMAND_CLASS_POWERLEVEL
®
)
®
)
®
product that can use encrypted Z-Wave Plus messages to communicate with security enabled
41