Hard Drive - HP ProBook 470 G5 Maintenance And Service Manual

Hard drive

Description
Hard drives
1 TB, 5400 rpm, 7 mm
500 GB, 5400 rpm, 7 mm, hybrid (8-GB SSD)
500 GB, 7200 rpm, 7 mm
Hard drive cover
NOTE: The hard drive cover is included in the Hard Drive Hardware Kit.
Before removing the hard drive, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Place the computer in "Battery Safe mode"
3. Disconnect all external devices connected to the computer.
4. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and
then unplugging the AC adapter from the computer.
5. Remove the main service door
6. Remove the drive service door
Remove the hard drive:
1. Remove the 2 Phillips M2.0×3.0 screws (1) that secure the hard drive to the computer.
2. Use the tab to pull the drive away from the connector (1).
(Battery Safe mode on page
(Service doors on page 31).
(Service doors on page 31).
Spare part number
762990-001
732000-001
778189-001
L00837-001
30).
Component replacement procedures 37