Diagnostics Via Snmp - Siemens SIMATIC RF186C Operating Instructions Manual

10.1.2

Diagnostics via SNMP

Comprehensive diagnostic options of the network functions of the communications module
are available via SNMP. The following diagnostic options (MIBs) are supported by the
communications modules:
● automationSimaticNet.mib
● automationSnSysterm.mib
● automationSystem.mib
● IEC-62439.mib
● IP.mib
● LLDP-EXT-DOT1.mib
● LLDP-EXT-DOT3.mib
● LLDP-EXT-PNO.mib
● LLDP.mib
● RFC1213.mib
● SNMPv2.mib
● SNMPv2Smi.mib
You can find the MIB files corresponding to the communications modules on the pages of
Siemens Industry Online Support
(https://support.industry.siemens.com/cs/ww/en/view/67637278) (automation MIBs) or on the
pages of the PROFINET user organization
specification/) (LLDP MIBs).
The communications modules support the SNMPv1 protocol. SNMP is activated at the
factory. You can find information on SNMP in the section "The "Settings - Communication"
menu item (Page 73)".
You can find detailed information on using SNMP and, in particular, on the structure of the
automation.mib in the diagnostics manual "Network management diagnostics and
configuration with SNMP (https://support.industry.siemens.com/cs/ww/en/view/103949062)".
SIMATIC RF185C, RF186C, RF188C, RF186CI, RF188CI
Operating Instructions, 06/2019, C79000-G8976-C512-02
(https://www.profibus.com/download/profinet-
Service and maintenance
10.1 Diagnostics
129