Configuration With Storage Tank And Auxiliary Wall-Mounted Boiler (Example) - Cadel RIVERIDRO 16 T2 Installer Manual

LEGEND
Disconnect any three-way valve and stove internal flow switch, if equipped with a DHW kit.

8.15 CONFIGURATION WITH STORAGE TANK AND AUXILIARY WALL-MOUNTED BOILER (EXAMPLE)

8.15.1 System with: pellet stove connected to a storage tank with auxiliary wall-mounted boiler
All activities relating to electrical connections in the electronic board must be carried out by
authorised personnel.
Parameters to set
Hydraulic diagram
LEGEND
33
new RIVER IDRO T2 - TESIS Airtight T2 - MIRA T2 - MAYA idroT2
Fig. 69
8
Storage tank
9 NTC probe
10 Release pump
11 Room thermostat
12 Expansion vessel
A Room thermostat independent from the stove (to be connected to the zone valves, if necessary)
B NTC probe to be connected directly to the electronic board (see electrical system)
SETTING
CONFIGURATION
AUXILIARY BOILER
Fig. 70 - Configuration with storage tank and auxiliary wall-mounted boiler
Fig. 70
1
Anti-condensation valve
VALUES
1 - 2 - 3 - 4 - 5
ON