Configuration 3 - Cadel RIVERIDRO 16 T2 Installer Manual

LEGEND
Disconnect any three-way valve and stove internal flow switch, if equipped with a DHW kit.

8.12 CONFIGURATION 3

8.12.1 System with: direct pellet stove and room probe or external thermostat** (optional) with external DHW
production controlled by box probe (optional)
All activities relating to electrical connections in the electronic board must be carried out by
authorised personnel.
** If the external thermostat is used, activate the "EXT THERMOSTAT" function on the control panel and con-
nect it directly to the electronic board (see electrical system below).
Adjustable setting
SETTING
ROOM TEMP.
WATER TEMP.
DHW TEMP
SEASON
AUTO ECO
Adjustable setting
Hydraulic diagram
29
new RIVER IDRO T2 - TESIS Airtight T2 - MIRA T2 - MAYA idroT2
Fig. 66
4
Electronic board
5 Stove
6 Zone valve
7 DHW
8 Storage tank
9 Thermostat bulb
10 Expansion vessel
Wiring diagram for connecting external thermostat and zone valve (in the case of several val-
A
ves, connect in parallel)
B Wiring diagram for connecting the external thermostat
C Thermostat to be connected directly to the electronic board (see electrical system)
D
3-way valve to be connected directly to the electronic board (see electrical system)
VALUES
5°C - 35°C
30°C - 80°C
75°C
WINTER (summer may be activated)
OFF (with winter setting)
ON (with summer setting, cannot be deactivated)
SETTING
CONFIGURATION
VALUES
3