Configuration 4 - Cadel RIVERIDRO 16 T2 Installer Manual

LEGEND
Disconnect any three-way valve and stove internal flow switch, if equipped with a DHW kit.

8.13 CONFIGURATION 4

8.13.1 System with: pellet stove connected directly to a storage tank for maintaining the temperature set and
controlled through a thermostat connected to it
All activities relating to electrical connections in the electronic board must be carried out by
authorised personnel.
Adjustable setting
30
new RIVER IDRO T2 - TESIS Airtight T2 - MIRA T2 - MAYA idroT2
Fig. 67 - Configuration 3
Fig. 67
1 Anti-condensation valve
2 External thermostat
3 Room probe
4 Electronic board
5
Stove
6
Zone valve
7
DHW
8 Storage tank
9 Box NTC probe
10 Expansion vessel
Wiring diagram for connecting external thermostat and zone valve (in the case of several val-
A
ves, connect in parallel)
B Wiring diagram for connecting the external thermostat
C NTC probe to be connected directly to the electronic board (see electrical system)
D 3-way valve to be connected directly to the electronic board (see electrical system)