1. Power LED
2. Ready to Arm LED
3. Armed LED
4. Trouble LED
5. WiFi Signal Strength LED
6. Cellular Signal Strength LED
7. Remote Connection LED
8. Siren
9. Microphone
Table 3-1 LED Indicator Operation
LED
Indicator
Power
ON Steady
[Green]
Flashing [Amber]
OFF
Ready
ON Steady
[Green]
OFF
Flashing [Amber]
Flashing [Green]
Section 3: Installation
Description
AC power is currently connected to the system.
System Test
(All status LEDs flashing at same time)
· System is not powered On
· NO AC connected, and system operating on backup battery
· NO AC connected and backup battery is discharged.
System is ready to arm.
System is not ready to arm. Not all zones are secure or a Fire or CO alarm is
present.
System Test ( AC, Ready, Trouble, Arm LED's, WiFi Trouble, Cellular Trouble &
System remote status flashing at same time)
Installer Walk Test ( Ready, Trouble and Arm LED's flashing at same time)
- 9 -