DSC WS900-19UL Reference Manual
  1. Manuals
  2. Brands
  3. DSC Manuals
  4. Home Automation
  5. WS900-19UL
  6. Reference manual
DSC WS900-19UL Reference Manual

DSC WS900-19UL Reference Manual

Iotega wireless security and automation system
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Wireless Security and Automation System
WARNING: This manual contains information on limitations regarding product use and function and information on the
limitations as to liability of the manufacturer. The entire manual should be carefully read.
V1.0 Reference Manual
Models:
WS900
UL
/WS901

Advertisement

Table of Contents
loading

Related Manuals for DSC WS900-19UL

Summary of Contents for DSC WS900-19UL

  • Page 1 Wireless Security and Automation System V1.0 Reference Manual Models: WS900 /WS901 WARNING: This manual contains information on limitations regarding product use and function and information on the limitations as to liability of the manufacturer. The entire manual should be carefully read.

  • Page 2: Table Of Contents

    Table of Contents Section 1: Introduction 1.1 About the System 1.1.1 Available Models 1.2 Compatible Devices List 1.3 Specifications Section 2: Installation 2.1 Alarm Controller Installation Figure 2-1 Panel Connections Figure 2-2 Panel Bottom Figure 2-3 Battery Compartment Figure 2-4 Battery Removal 2.2 Controls and Indicators Figure 2-5 LED Indicators 2.3 Enrolling Wireless PowerG Security Devices...
  • Page 3 4.6.7 Wireless Temperature Configuration Options 4.6.8 Wireless Flood Configurations 4.6.9 Wireless PIR CAM Configurations 4.6.10 Wireless PIR (NO CAM) Configurations 4.6.11 Wireless Door Window Configurations 4.6.12 Wireless Shock Sensor Configurations 4.6.13 Repeater Configuration Options 4.7 Available Zone Types 4.8 Available Zone Attributes 4.9 Diagnostics - Read Only 4.10 System Control 4.10.1 Device...
  • Page 4 iotega Wireless Security and Automation System the mains plug and associated mains socket/outlet, is never obstructed. Safety Instructions for Service Persons There are no parts replaceable by the end-user within this equipment. The Warning: When using equipment connected to the telephone network, always follow wiring (cables) used for installation of the alarm system and accessories, the basic safety instructions provided with this product.

  • Page 5: Section 1: Introduction

    Section 1: Introduction Section 1: Introduction 1.1 About the System The iotega is an easy to use, wireless security and home automation panel. iotega supports a range of wireless devices via PowerG or Z-Wave. Installers set up and configure the panel through a smartphone app or cloud-based portal. End users also interact with the iotega using an intuitive smartphone app, web portal or optional wirefree and touchscreen keypads.
  • Page 6 Section 1: Introduction Product Type Model Touchscreen Keypad* WS9TCHW Wirefree LCD Keypad WS9LCDWF Cellular Communicator 3G7090/LT7090 PowerG Wireless vanishing door/window contact PGx975 Wireless door/window contact w/ AUX PGx945 Wireless smoke detector PGx926 Wireless smoke and heat detector PGx916 Wireless CO detector PGx913 PIR/Pet Immune Motion Detector PGx914...
  • Page 7 Section 1: Introduction Z-Wave Devices See the Smarttech portal for a complete list of supported Z-Wave devices. Note: These supplementary devices have not been evaluated by UL/ULC for compatibility with the alarm control panel. Central Monitoring Station Receivers Receiver Sur-Gard System I-IP Receiver SG-System I-IP Receiver Sur-Gard System II Receiver...

  • Page 8: Specifications

    Primary: 120VAC, 0.35A, 60Hz Class II Secondary: 12VDC, 1.16A Standard Battery Model: DSC model 17000178, 7.4V,1.0Ah lithium-Ion, rechargeable (Note: This battery pack shall not be used with UL/ULC Household Fire Alarm Signaling system) Backup time: 4 hours Recharging time to 85%: 24 hours (UL) Low battery threshold: 7.3V...
  • Page 9 Section 1: Introduction Battery Critical Shutdown: 6.2V Battery lifespan: 3-5 years Operating Environmental Conditions Temperature range: UL= 0°C to +49°C (32°F-120°F), EN= -10°C to 55°C (50°F-131°F) Relative humidity: <93% non condensing Alarm Transmitter Equipment (ATE) Specification Communications over cellular or Ethernet Supports SIA and Contact ID Complies with TS203 021-1, -2, -3 Telecom equipment requirements and EN50136-1-1, EN50136-2-1, EN50136-2-3 ATS 2...

  • Page 10: Section 2: Installation

    Restarting the panel may remedy the issue. The following UDP ports must be open: 1234, 1235, and 1236. If the prob- lem persists, contact DSC technical support. Note: When replacing the battery, use battery pack suitable for the application. Refer to on page 5.

  • Page 11: Figure 2-1 Panel Connections

    Section 2: Installation Figure 2-1 Panel Connections 1. Power Connector 2. Ethernet Link Speed LED 3. Ethernet Link Activity LED 4. Ethernet Port Figure 2-2 Panel Bottom Figure 2-3 Battery Compartment 1. Power cable Strain Relief 4. Battery 2. Access Cover for Battery, SIM Card and Reset Button 5.

  • Page 12: Controls And Indicators

    Section 2: Installation Installing a new battery 1. Remove the access cover from the back of the panel. 2. Insert the battery, back end first, as shown in Figure 2-4 . 3. Press the front of the battery down until the retention tab clicks into place. 4.
  • Page 13 Section 2: Installation Indicator Description Power ON Steady AC power is currently connected to the system. [Green] Flashing [Amber] System Test (All status LEDs flashing at same time) ·         System is not powered On ·         NO AC connected, and system operating on backup battery ·        ...
  • Page 14 Note: If the Remote Connection status LED flashes red, the panel may be having difficulty connecting to the remote server. Restarting the panel may remedy the issue. If the problem persists, contact DSC technical support. Reset Button Pressing and holding the Reset button, located under the battery cover (see figure 3-3), for a minimum of 10 seconds per- forms a vendor reset.

  • Page 15: Enrolling Wireless Powerg Security Devices

    Section 2: Installation Tamper Switch The panel includes a tamper switch under the back battery cover. If the battery cover is removed while the system is dis- armed, the tamper condition must be cleared before arming is permitted. If the battery cover is removed while the system is armed, the bell sounds, a system tamper is logged and communicated to the central monitoring station, and a system tem- per trouble is displayed in the Trouble menu.

  • Page 16: Section 3: Operation

    Section 3: Operation Section 3: Operation This section describes how to use the iotega‘s integrated keypad. 3.1 Using the Integrated Keypad The iotega includes a built-in, touch sensitive keypad that activates by proximity. From the keypad, users can arm and dis- arm the system, view system troubles, and activate the Fire (F), Auxiliary (A) and Panic (P) keys.

  • Page 17: Wps Mode ([*]8)

    Section 3: Operation To use the Emergency keys: 1. Press the Shift key (↑). The Emergency keys are illuminated (if enabled ). If an Emergency key is not pressed within 10 seconds, the keypad returns to normal operating mode. 2. Press and hold an Emergency key for 2 seconds to activate the alarm. 3.1.3 WPS Mode ([*]8) WPS (Wi-Fi Protected Setup) mode activates iotega‘s Wi-Fi access point to facilitate connection with IP devices, such as the touchscreen keypad and IP cameras.

  • Page 18: Quick Arming

    Section 3: Operation 3.2.3 Quick Arming Quick arming enables users to arm the system via touchscreen or wirefree keypad without entering an access code. This provides a fast method of arming for regular users and allows users without an access code to arm the system. The Quick Arming feature must be enabled in order for this function to operate.

  • Page 19: Section 4: Programming Options

    Section 4: Programming Options emergency alarm reporting code to the central monitoring Section 4: Programming station. When the emergency reporting code is received, the Options keypad beeps 10 times. Default: Enabled This section provides descriptions of all alarm controller Valid range: Enabled, Disabled options, both programmable and read-only.
  • Page 20 Section 4: Programming Options System Account Number Bell Squawk on Arming The system account number is used to identify the alarm sys- With this option enabled, the iotega chirps the sirens briefly tem when communicating system events to the central mon- at full volume when the system is successfully armed.
  • Page 21 Section 4: Programming Options RF Jam will restart trouble beeps. For troubles that have been When this option is enabled, the alarm panel detects and silenced but are still present, trouble beeps restart daily at reports continuous wireless signals that could interfere with 7am.
  • Page 22 Section 4: Programming Options DNS 2 IP Address Default: Disabled This is the resolved value based on the DHCP address Valid range: Enabled/Disabled assignment. Default: 000.000.000.000 Wireless Supervisory Window Valid range: Read-only Use this option to program the time window for reception of supervision (keep alive) signals from wireless devices Access Code Required to View/Silence Troubles enrolled on the system.
  • Page 23 Section 4: Programming Options [A] Key Alarm control (for 2-way Voice) event is not communicated until swinger shutdown is When this option is enabled, a 2-way talk/listen-in session is cleared. initiated when the Auxiliary [A] key is tapped. 002 (UL/ULC) Default: 003 (Standard) Default:...

  • Page 24: Reporting Configuration Options

    Section 4: Programming Options operator has 20 seconds to begin another two-way voice Cold Start Installer Lead In/Out interval. FW Update( Begin, Successful, Fail) If the new alarm is generated during the last 20 seconds of Default: Enabled the two-way voice interval, the monitoring station operator Valid range: Enabled/Disabled has the remainder of the interval to begin another two-way...

  • Page 25: Network Configuration Options

    Section 4: Programming Options Alarm Restoral selected, the iotega is automatically assigned an IP address When this option is enabled, the following alarm restoral by the network. When events are reported to the central monitoring station when Static IP is selected, a consistent IP address is used. they occur.

  • Page 26: Central Monitoring Station Programming Options

    Section 4: Programming Options Panel's Cellular Public APN Note: Domain Name Service (DNS) programming is not per- This section is used to program the Access Point Name of mitted in UL/ULC listed systems the network used for cellular-data connectivity. Note: To use the panel’s alternate DNS server, the option Default: Blank LAN/WLAN Obtain IP Address must be set to Static IP...
  • Page 27 Section 4: Programming Options CMS Ethernet 1 Local Port Cellular: The system communicates to the central monitoring Use this section to set the value of the local outgoing port. station via cellular connection only. Set the value of this port when the installation is located Ethernet and Cellular: The system communicates to the cent- behind a firewall and must be assigned a particular port ral monitoring station via Ethernet as the primary path and...
  • Page 28 Section 4: Programming Options port number as determined by the central monitoring station Default: 000000 system administrator. Valid range: 000000 to FFFFFF (first digit not used) Default: 3061 (0BF5) CMS Ethernet 2 IP Address Valid range: 0000 to 65535 Enter the Ethernet receiver 2 IP address. This address will be provided by the central monitoring station system admin- CMS Ethernet 2 Domain Name istrator.

  • Page 29: Other Communicator Related Options

    Section 4: Programming Options CMS Cellular 1 APN Default: 000.000.000.000 The Access Point Name (APN) determines the cellular net- Valid range: 000.000.000.000.to 255.255.255.255 work that the communicator will connect to. This information is available from the network carrier. CMS Cellular 2 Remote Port Note: When a SIM card with a custom APN is used, the unit Enter the cellular receiver 2 IP address.
  • Page 30 Section 4: Programming Options Ethernet Test Transmission Time the communicator path to the receiver is provided. Enter a 4-digit number (0000-2359) using the 24-hour clock Default: Enabled format (HHMM) to set the time of day an Ethernet test trans- Valid range: Enabled/Disabled mission is sent.

  • Page 31: 2-Way Voice Options

    Section 4: Programming Options Visual Verification the microphone. This feature enables the central monitoring station operator Default: to view images captured via installed camera/motion detect- Valid range: 000 to 255 ors during an alarm. Visual verification sessions are triggered by the following: Voice Volume Fire key This option is used to program the volume level of the built-...
  • Page 32 Section 4: Programming Options 45 seconds (standard), 30 seconds (CP-01) (Note: Max. 45 Default: Disabled Default: seconds required for UL/ULC) Valid range: Enabled/Disabled 30 to 255 Seconds (UL/ULC) Valid range: 0 to 255 (standard) Internal Siren When this option is enabled, The iotega’s built-in siren activ- Exit Delay ates during an alarm.

  • Page 33: Wireless Device Configuration Options

    Section 4: Programming Options No Activity Arm timer Fire Button Options This option is used to tell the iotega to arm in Away mode When this option is enabled, pressing and holding the Fire when no zone activity is detected during the programmed [F] button on the wirefree keypad for 2 seconds triggers a amount of time.

  • Page 34: User Configuration Options

    Section 4: Programming Options Armed LED Power Save Option Local Clock Display Option This option is used to control the Armed LED on/off state. If When this option is enabled, the keypad displays the time enabled, the Armed LED does not illuminate when the sys- and date when not in use.

  • Page 35: Wireless Siren Configuration Options

    Section 4: Programming Options Enable/disable chime Default: Siren 1 View system troubles Valid range: 32 character ASCI View alarm in memory Master user: Siren Enable/Disable Has access to all system functionality. These functions This option is used to enable and disable the wireless siren. include: Default: Enabled...

  • Page 36: Wireless Key Configuration Options

    Section 4: Programming Options Activity LED Default: Enabled When this option is enabled, the Activity LED flashes every Valid range: Enabled/Disabled few seconds to indicate that the siren is enrolled and active. Default: Disabled Wireless Key Partition Assignment Valid range: Enabled/Disabled This option is used to assign the wireless key to an available partition.

  • Page 37: Wireless Glassbreak Configuration Options

    Section 4: Programming Options Device Enable/Disable Swinger Shutdown Disabled (read-only) This option is used to enable and disable wireless smoke Two Way Audio Disabled (read-only) and CO detectors. Talk Listen Disabled (read-only) Default: Enabled Valid range: Enabled/Disabled Supervision This section is used to enable/disable wireless supervision Device Partition Assignment of the device.

  • Page 38: Wireless Temperature Configuration Options

    Section 4: Programming Options Device Label Device Partition Assignment This section is used to program a custom label for the This option is used to enable and disable the wireless device. device. Default: Zone ZZZ Default: Enabled Valid range: 32 character ASCII Valid range: Zone Attribute Chime Tone...

  • Page 39: Wireless Flood Configurations

    Section 4: Programming Options Note: Wireless Flood feature was not evaluated by UL/ULC. Default: Enabled Valid range: Enabled/Disabled Device Enable/Disable This option is used to enable and disable the wireless Temperature Format device. This section is used to select the scale temperature is dis- Default: Enabled played in.

  • Page 40: Wireless Pir Cam Configurations

    Section 4: Programming Options Zone Type Force Arm Disabled (read-only) This programming section is used to program a zone type Swinger Shutdown Disabled (read-only) for the device. Two Way Audio Disabled (read-only) Default: Interior Follower Talk Listen Disabled (read-only) Instant, Interior Follower, Interior Stay/Away, Delay Valid Stay/Away, 24 Hour Supervisory Buzzer, 24 Hour Non range:...

  • Page 41: Wireless Pir (No Cam) Configurations

    Section 4: Programming Options Audio (mic) period is reported onece the timer expires. No Delay causes This option is used to enable/disable the built-in microphone the device to report an alarm each time the detector is on the device. tripped. Default: Disabled Default: Not Active...

  • Page 42: Wireless Door Window Configurations

    Section 4: Programming Options Zone Attribute timer expires. Any motion detected during the configured This section is used to customize zone behavior for the period is reported onece the timer expires. No Delay causes device. The table below specifies the status of each attribute the device to report an alarm each time the detector is for this device.

  • Page 43: Wireless Shock Sensor Configurations

    Section 4: Programming Options separately mounted magnet as part of the trigger mech- Default: Enabled anism. Valid range: If the reed switch is enabled and a device is hardwired to the external input terminals, both sensors transmit sim- Chime Tone This option is used to select the tone emitted by the device ultaniously.

  • Page 44: Repeater Configuration Options

    Section 4: Programming Options Device Label simultaniously. However, the iotega treats both devices as This option is used to program a custom label for the wire- the same zone. Disable the reed switch to have the hard- less device. wired device funciton independantly. Default: Zone ZZZ Default:...

  • Page 45: Available Zone Types

    Section 4: Programming Options Default: Enabled When the zone is activated, a 40-second delay begins. The alarm is triggered if the zone is still faul- Valid range: Enabled/Disabled ted after 30 seconds. If the zone is no longer in alarm, an 80-second verification timer begins.

  • Page 46: Available Zone Attributes

    Section 4: Programming Options 4.8 Available Zone Attributes This section displays the unique 15-digit International Mobile Equipment Identity (IMEI) of the radio. The format of The following table defines each available zone attribute. the IMEI is: Reporting Body Identifier (2 digits), Allocation When this attribute is enabled, zone alarm and restore Number (4 digits);...

  • Page 47: Device

    Section 4: Programming Options Alarm Control Panel Placement Test The device has not received any communications from Missing the panel during the supervision monitoring period. This test is used to check the panel location for signal noise Not Net- The device is registered but not activated on the network. that could interfere with the proper operation of the alarm worked system.

  • Page 48: Section 5: Troubleshooting

    Section 5: Troubleshooting Section 5: Troubleshooting 5.1 Testing: Power up the system Program options as required (see programming section) Trip then restore zones Verify correct reporting codes are sent to the central monitoring station 5.2 Viewing Troubles from the Integrated Keypad 1.
  • Page 49 Section 5: Troubleshooting 1 st Layer 2 nd Layer 3 rd Layer System Trouble Battery Trouble Tamper Hardware Fault Loss of Time RF Jam Zone AC Trouble 1-128 Battery Trouble 1-128 Tamper 1-128 Fault (Supervision) 1-128 Not Networked 1-128 Fire/CO Trouble 1-128 Siren Future Use...

  • Page 50: Network Troubleshooting

    The router must have the bound port fil- required ports enabled for www.tyco.com tering outbound traffic www.dsc.com www.amazon.com • NTP - 123/UDP • TycoOn - 443/UDP (configurable) • SecureNet - 1234/UDP • CMS - Programmable/UDP x2 Ethernet receivers Router must be pro- DHCP - with fixed Router uses DHCP to assign a fixed IP address to the iotega based on the MAC address.

  • Page 51: Appendix 1: Guidelines For Locating Smoke Detectors And Co Detectors

    Appendix 1: Guidelines for Locating Smoke Detectors and CO Detectors Appendix 1: Guidelines for Locating Smoke Detectors and CO Detectors The following information is for general guidance only and it is recommended that local fire codes and regulations be con- sulted when locating and installing smoke and CO alarms.
  • Page 52 Appendix 1: Guidelines for Locating Smoke Detectors and CO Detectors Figure 3 Figure 2 Figure 1 Figure 3a Figure 4 Carbon Monoxide Detectors Carbon monoxide is colorless, odorless, tasteless, and very toxic. It also moves freely in the air. CO detectors can measure the concentration and sound a loud alarm before a potentially harmful level is reached.
  • Page 53 Appendix 1: Guidelines for Locating Smoke Detectors and CO Detectors 1. Are all electrical appliances and outlets in a safe condition? Check for frayed cords, overloaded lighting circuits, etc. If you are uncertain about the condition of your electrical appliances or household service, have a professional eval- uate these units.

  • Page 54: Appendix 2: Reporting Codes

    Appendix 2: Reporting Codes Appendix 2: Reporting Codes The following tables contain Contact ID and Automatic SIA format reporting codes. Contact ID Each of the digits indicate specific information about the signal. For example, if zone 1 is an entry/exit point, the event code contains [34].
  • Page 55 Appendix 2: Reporting Codes Dialer Dir- Automatic Contact ID Section # Definition SIA Auto Rep Codes** ection* Codes Siren 12 tamper/restore alarm E (3)83-812 / R (3)83-812 TA-0812 / TR-0812 Siren 13 tamper/restore alarm E(3)83-813 / R (3)83-813 TA-0813 / TR-0813 Siren 14 tamper/restore alarm E (3)83-814 / R (3)83-814 TA-0814 / TR-0814...
  • Page 56 Appendix 2: Reporting Codes Dialer Dir- Automatic Contact ID Section # Definition SIA Auto Rep Codes** ection* Codes E(3)AA-001 Alternate Communicator Ethernet trouble/restore MA/R YX-0001 / YZ-0001 R(3)AA-001 E(3)5A-001 Alternate Communicator Receiver 1 absent/restore MA/R YS-0001 / YK-0001 R(3)5A-001 E(3)5A-002 Alternate Communicator Receiver 2 absent/restore MA/R YS-0002 / YZ-0002...
  • Page 57 Appendix 2: Reporting Codes Dialer Dir- Automatic Contact ID Section # Definition SIA Auto Rep Codes** ection* Codes E(3)8A-ZZZ Carbon monoxide trouble/restore MA/R UT-ZZZZ / UJ-ZZZZ R(3)8A-ZZZ E (3)A1-901 Repeater 1 AC fail/restore MA/R AT-0901 / AR-0901 R (3)A1-901 E(3)A1-902 Repeater 2 AC fail/restore MA/R AT-0902 / AR-0902...
  • Page 58 Appendix 2: Reporting Codes Dialer Dir- Automatic Contact ID Section # Definition SIA Auto Rep Codes** ection* Codes Recent Closing - Alarm occurs within two minutes of system E(4)59-UUU CR-UUUU arming Burglary Verified E(1)39-000 BV-0000 Burglary Not Verified E(3)78-000 BG-0000 Alarm Canceled before expiry of alarm cancellation timer E(4)A6-UUU OC-UUUU...
  • Page 59 Appendix 2: Reporting Codes Dialer Dir- Automatic Contact ID Section # Definition SIA Auto Rep Codes** ection* Codes Periodic test with trouble MA/R E(6)A2-RRRR RP-RRRR A/R = alarms/restores; T/R = tampers/restorers; O/C = openings/closings; MA/R = maintenance alarms/restores; T = test trans- missions UUU = user number.

  • Page 60: Appendix 3: Regulatory Information

    Appendix 3: Regulatory Information Appendix 3: Regulatory Information This product has been tested and found in compliance with the following standards: UL1023 Household Burglar-Alarm System Units UL985 Household Fire Warning System Units ULC-S545-02 Residential Fire Warning System Control Units ORD-C1023-1974 Household Burglar-Alarm System Units This product has also been tested and found in compliance with the ANSI/SIA CP-01-2014 Control Panel Standard –...
  • Page 61 Appendix 3: Regulatory Information Wireless Supervision window shall be set to 4 hours for Fire Installations (refer to Installer portal > Panel Set- tings>Panel Configuration>Comms Configuration > Ethernet Supervision, Cellular Supervision) Wireless Supervision window shall be set to 24h for Burglary Installations only (refer to Installer portal > Panel Set- tings>Panel Configuration>Comms Configuration >...
  • Page 62 Appendix 3: Regulatory Information installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or tele- vision reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient the receiving antenna.
  • Page 63 SIA False Alarm Reduction Installations: Quick Reference Caution Fire Alarm Verification feature (Auto Verified Fire Zone) is supported on the DSC Wireless Smoke Detector, Model PGx916 and PGx926. The fire alarm delay is 40s. Notes: Programming at installation may be subordinate to other UL requirements for the intended application.
  • Page 64 SIA Feature Comments Range/Default Requirement Programming Section Communications Canceled Win- Access to the programmable Cancel Win- Range: minimum 5 min. Required dow. Default: 5 min. Panel Settings>Panel Con- Note: minimum 5 min. for figuration>System Con- UL installations figuration>Communication Cancel Window Cancel Annunciation Access to the reporting code for Alarm Annunciate that a Cancel...

  • Page 65: Appendix 3: Eula

    You may not make any changes or modifications to the Software, without the written per- INCLUDING CUSTOMERS, AND INJURY TO PROPERTY. mission of an officer of DSC. You may not remove any proprietary notices, marks or labels from DSC recommends that the entire system be completely tested on a regular basis. However, des- the Software Product.

  • Page 66: Appendix 4: Limited Warranty

    DSC. Custom products are only warranted to the extent that they do not function upon delivery. In such cases, DSC can replace or credit at its option.

  • Page 67: Appendix 5: Warning: Installer Please Read Carefully

    If the system is remotely monitored, the response may not occur in time to protect the occu- addresses: pants or their belongings. Model WS901-14: http://dsc.com/pdf/1707001 Motion Detectors Model WS901-24EU: http://dsc.com/pdf/1707002 Motion detectors can only detect motion within the designated areas as shown in their respective installation instructions.
  • Page 68 Appendix 5: WARNING: Installer please read carefully Product specifications: Frequency Bands Maximum Power g1 433.04MHz – 434.79MHz 10mW h1.4 868.0MHz – 868.6MHz 10mW h1.5 868.7MHz – 869.2MHz 2400MHz-2483.5MHz 100mW Class 4 (2W) @ 900 MHz, E-GSM EGSM/EDGE: 880MHz – 915MHz Class E2 (0.5W) @ 900 MHz, EDGE Class 1 (1W) @ 1800 MHz, DCS DCS/EDGE: 1710MHz –...
  • Page 69 Product offerings and specifications are subject to change without notice. Actual products may vary from photos. Not all products include all features. Availability varies by region; contact your sales representative. © 2017 Tyco Security Products All Rights Reserved. Tech Support: 1-800-387-3630 (Canada & U.S.) or 905-760-3000 www.dsc.com...

This manual is also suitable for:

Ws900-29ulWs901-24euWs901-34euWs901-18Ws901-28Ws901-24au ... Show all

Table of Contents