KTM F5003R1 2018 Owner's Manual page 117

Main work
–
Loosen nut
–
Loosen nuts
–
Adjust the chain tension by turning adjusting screws
and right.
Guideline
Chain tension
Turn the adjusting screws
the markings on the left and right chain adjusters
the same position relative to the reference marks
rear wheel is then correctly aligned.
Info
The upper part of the chain must be taut.
Chain wear is not always even, so you should check the
setting at different chain positions.
–
Tighten nuts
V00645-10
–
Make sure that chain adjusters
adjusting screws
–
Tighten nut
Guideline
Nut, rear wheel spin-
dle
SERVICE WORK ON THE CHASSIS 12
1
.
2 .
5 ... 7 mm (0.2 ... 0.28 in)
3
on the left and right so that
2
.
4 are fitted correctly on
3 .
1
.
M14x1.5
3
left
4
are in
A . The
90 Nm (66.4 lbf ft)
115