Asko T608HX W Series Instructions For Use Manual page 44

FAILURE DISPLAY
In case of a failure while a program is in progress, the relevant Error X is indicated on the display unit.
Error
Errors indicated on the display unit (depending on the model) may include the following:
Problem/ Error indication on the display
error
Error 0
Error 1
Error 2
Error 3
Error 4
Error 6
Error 7
Error 8
Error 9
44
Error 3
Error
E0 – Please check user manuals or call service.
Error
E1 - Thermistor fault. Please check user manuals or call service.
Error
E2 - Please check user manuals or call service.
Error
E3 – Pump failure. Please check user manuals or call service.
Error
E4 – Please clean filters or call service.
Error
E6 - Relay failure. Please check user manuals or call service.
Error
E7 - Door failure. Please check user manuals or call service.
Error
E8 - Button failure. Please check user manuals or call service.
Error
E9 - PB/UI software versions are not compatible
Press and hold the INFO button to
display the error description.
Switch off the dryer and turn it back on.
Info
5
What to do?
Control unit failure.
Call service centre.
Temperature sensor failure.
Call service centre.
Communication error.
Call service centre.
Failure on the pump for pumping the
condensate into the condensate tank
Call service centre.
Control unit failure.
Clean the filters. See chapter
"CLEANING AND MAINTENANCE" or
call service centre.
Control unit failure.
Call service centre.
Control unit failure.
Call service centre.
Control unit failure.
Call service centre.
Call service centre.