Asko T608HX W Series Instructions For Use Manual page 26

5. Delay Start
Choose the delayed start when you wish the drying program to start after a certain period of time (30 minutes
to 24 hours after you press the Start/Pause button). The estimated time remaining until the end of the drying
program will be indicated above the "6" button.
Set Delay start
Off
Back
Everyday wash Everyday wash Auto extra dry
Program Program
Extra dry
Delayed start cannot be set for the favourite programs.
If you do not take any action for 5 minutes, the display will switch to standby mode.
Press the ON/OFF button to reactivate it. The countdown to the start of the drying cycle will be displayed.
If the dryer is in the standby mode, the display will switch on 1 minute before the start of the drying cycle.
After the countdown, drying time will be indicated on the display unit.
6. Selecting extra functions (Options)
Press the 5 button to confi rm the extra settings / options. Confi rm your selection by pressing the button under
the selected function or option.
The following extra functions* are available:
* Anti-crease
This function is active after the drying cycle.
Press the button under the anti-crease function.
You may choose the duration of the anti-crease program from 0 hours
steps.
* Steam (steam fi nish)
By pressing the 5 button, you can switch the steam drying on
Steam fi nish gives the laundry a steam treatment, like straightening the creases and refreshing the laundry
with steam in the end of program cycle (only for programs in which steam treatment is possible).
* Adding to favourite programs (Add to Fav)
To store the selected program as a favourite program, press the 6 button.
Use the program selector knob to select the position in which to store the program.
Press the 6 button to confi rm your selection.
The program will be stored.
Some functions may not be available on drying programs.
26
30 min
1 h
Gentle dry Load Delay start
Use the program selector knob to set
the delay from 30 minutes to 6 hours in
1,5 h 2 h
30-minute steps, and then from 6 hours
to 24 hours in 1-hour steps.
Press the button under the selected
time/duration to confi rm the setting.
Press the Start/Pause button to start.
When the countdown reaches zero,
the selected drying program will start
automatically.
To cancel the delay and start the drying
1:42 h
process immediately, press the "5"
Off
button – Cancel (Skip Delay).
When Start delay time is once set, it
Options
is not possible to change it; the only
possibility is to »Skip« it (Off ) and
continue with chosen program.
5
or off
(OFF) to 4 hours , in 1-hour
.