Asko T608HX W Series Instructions For Use Manual page 17

CONNECTING TO THE POWER MAINS
After installation, the dryer should stand still for
two hours before it is connected to the power mains.
Connect the appliance to an earthed power outlet.
After installation, the wall outlet should be freely
accessible. The outlet should be fi tted with an earth
contact (in compliance with the relevant regulations).
Connection upon delivery
TYPE: TDXX.XXXXX
Art.No.: XXXXXX/XX
XXX V ~ XXXX W
IPX4 XX Hz
Refrigerant: X XXXX
Information about your dryer is indicated on the
rating (type) plate.
Use the type A diff erential current protection switch.
The dryer shall not be connected to the power
mains using an extension cord.
Do not connect the tumble dryer to an electrical
outlet intended for an electric shaver or hair dryer.
Any repair and maintenance pertaining to safety
or performance should be done by trained experts.
MODEL: XXXXXX.X
Ser.No.: XXXXXXXX
X kg
XXA
Volume: XXXX
17