Asko T608HX W Series Instructions For Use Manual page 33

CUSTOMIZE FAVORITES AND PROGRAMS
The main menu includes the entire set of programs that you can choose using the program selector knob.
This setting allows only displaying the selected program in the main menu.
Auto extra Auto Auto normal
Customize programs
Extra Dry
1
Auto jeans
CONDENSED WATER
You can choose between draining condensed water into a condensate tank or directly into the drain.
Condensed Water
RESET DEFAULT
Use the program selector knob to choose the default settings (reset to default). This means that all settings
will return to the default settings and your own settings and favourite programs will be deleted.
Reset dryer settings?
SOUNDS
In the initial stage of drying or during drying, the compressor and the pump may cause noise which,
however, does not aff ect the dryer operation.
Humming sound: this is the sound of the compressor unit. The level of noise depends on the program and the
drying stage.
Whirring sound: from time to time, the compressor unit is ventilated.
Pumping sound: the pump is pumping the condensate into the condensate tank.
Clicking sound: clicking noise is caused by automatic cleaning of the heat exchanger (compressor).
Rustling water sound: can be heard during automatic cleaning.
Rattling sound: can be heard during drying if laundry has any hard parts (buttons, zippers etc.)
Auto iron Auto jeans
Gentle Dry Load
2 3
Auto iron Bedding Auto normal
Use the program selector knob to select
a program.
Confi rm your selection with the button
under the selected program.
Auto synth
program.
Only programs indicated with
Options Delay
appear on the display unit.
Use the button
Auto jeans
Use the program selector knob or
buttons to choose between following:
"Tank"- run condensate water into a
condensate tank
Tank Drain
"Drain" – run condensate water into a
drain
If you decide to choose option "Drain",
it is necessary to observe how to
connect drain hose (see chapter
"INSTALLATION AND CONNECTION /
Draining the condensate").
Confi rm the selection by pressing the
button under the reset option.
Reset default Use the button
will appear next to the selected
to return to Settings.
to return to Settings.
will
33