Advertisement

Quick Links

Tumble dryer
INSTRUCTIONS FOR USE
T611HX
TD85.23XX
Carefully read the instructions for use before using the dryer.

Advertisement

Table of Contents
loading

Summary of Contents for Asko T611HX

  • Page 1 Tumble dryer INSTRUCTIONS FOR USE T611HX TD85.23XX Carefully read the instructions for use before using the dryer.
  • Page 2: Table Of Contents

    Dear Customer, We thank you for purchasing this quality ASKO product. We hope it meets all your expectations. Scandinavian design combines pure lines, everyday functionality, and high quality. These are the key characteristics of all our products, and the reason why they are highly appreciated across the globe.
  • Page 3: Safety Precautions

    • Failure to observe the instructions for use or inappropriate use of the tumble dryer may result in damage to the laundry or appliance, or injury to the user. • Instructions for use are available on our website at www.asko.com. • Your dryer is intended solely for household use.
  • Page 4 • Do not dry unwashed laundry in the dryer. • Laundry stained with oil, acetone, alcohol, oil derivatives, stain removers, turpentine, wax, and wax removers should be washed in a washing machine with hot water and detergent before it is dried in the dryer. •...
  • Page 5 SAFETY • Only use the dryer to dry laundry that was washed with water. Do not dry any laundry that was washed or cleaned with fl ammable cleaners or substances (such as gasoline, trichloroethylene etc.) as this may result in an explosion.
  • Page 6 • Do not let children younger than three years to come near the dryer, unless they are under constant supervision. • The dryer is made in compliance with all relevant safety standards. This dryer may be used by children aged 8 years and above and by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge, but only if they are supervised during the use of the appliance, if they have been provided relevant instructions regarding safe use of the...
  • Page 7: Dryer Description

    DRYER DESCRIPTION Main switch (ON/OFF) 2 3 4 5 Program selector knob Display unit Program selector buttons Button (start/pause) Rating plate with information about the dryer (on the inside of the drying machine door) QR and AUID code (on the inside of the drying machine door) Dryer door Door net fi...
  • Page 8: Before Using The Appliance For The First Time

    BEFORE USING THE APPLIANCE FOR THE FIRST TIME PACKAGING Remove all packaging. Please sort the materials in compliance with local recommendations (see chapter "DISPOSAL"). CLEANING Disconnect the dryer from the power mains and open the door towards you. Before using the dryer for the fi rst time, clean the dryer drum using a soft damp cotton cloth and water.
  • Page 9 Remove the condensate tank Slowly add distilled water to the steam generator tank filter. By pouring the water slowly, you will prevent the water from fl owing down the front wall of the appliance. Steam generator tank is not visible as it is located in the dryer interior; only the steam generator tank fi lter is visible.
  • Page 10: Installation And Connection

    fi xed to it, to avoid the risk of falling. ASKO original accessories are available for this Place the dryer so that it is stable. Use a spirit purpose, complete with fi xing instructions.
  • Page 11 (A+B), supplied in the cardboard box in the dryer drum. Tipping guard part B is designed to fi t on ASKO 100 mm washing machines and it may be hard or impossible to mount on appliances of other brands.
  • Page 12 How to stack a dryer onto the washing machine (ASKO): There is a cardboard box in the dryer drum, containing the vacuum feet and the tipping guard. The tipping guard consists of two metal parts (A + Use two screws to attach the A part to the back of the dryer.
  • Page 13 CHANGING THE DOOR OPENING DIRECTION To change the direction of door opening, proceed as follows. Open the door fully. Undo the screws and remove the door. Use a screwdriver to remove the door lock cover and undo the screw on the door lock. Push the door lock upwards and remove it.
  • Page 14 Undo the door hinge assembly (left) and the door latch assembly (right), switch their positions, and replace the screws (door hinge assembly to the right- hand side, door latch assembly to the left-hand side). Use a screwdriver to remove the plastic part more easily.
  • Page 15 Ventilation Requirements of ASKO laundry concept or closet installation ASKO's front panel controls make it possible to install the washers and dryers in a cabinet or closet. Make sure there is clearance between appliances and cabinet or wall and 25 mm minimum clearance between the rear edge of the appliance top panel and the cabinet or wall.
  • Page 16 DRAINING THE CONDENSATE The moisture from the laundry is extracted in the condenser unit and accumulated in the condensate tank. Condensate tank has to be emptied regularly (see chapter "CLEANING AND MAINTENANCE"). To simplifi ed and avoid emptying and interruption of the drying cycle due to full condensate tank, run the condensate discharge tube located at the back of the appliance directly into a drain (see chapter "SETTINGS/ Condensed water").
  • Page 17 CONNECTING TO THE POWER MAINS After installation, the dryer should stand still for two hours before it is connected to the power mains. Connect the appliance to an earthed power outlet. After installation, the wall outlet should be freely accessible. The outlet should be fi tted with an earth contact (in compliance with the relevant regulations).
  • Page 18 ASKO LAUNDRY CARE - HIDDEN HELPERS* Laundry care ironing board The ironing board is a clever solution. It is always handy when you need to iron your clothes, and it can be easily, safely and invisibly stored away when not in use.
  • Page 19 Laundry care plinth Thanks to the stainless steel plinth, your appliance will be raised by 30 cm, which makes loading and unloading of laundry easier. *AVAILABILITY DEPENDING ON MARKET DENOMINATION ART. No. IRONING BOARD HI1153 White 576552 IRONING BOARD HI1153 Stainless steel 732756 IRONING BOARD HI1153 Titanium 576553...
  • Page 20: Advices Before Drying

    ADVICES BEFORE DRYING LAUNDRY SYMBOLS This chapter includes several advices on how to prepare the laundry from drying. Observe the laundry symbols. LAUNDRY SORTING Textile maintenance symbols: Sort the laundry according to: Washing • type, • fabric thickness. Normal Delicate For the most even drying, make sure the laundry is Max.
  • Page 21 MATERIALS (FABRICS) SUITABLE FOR DRYING IN A TUMBLE DRYER Material is suitable for tumble drying. Clothes dried in a tumble dryer will be softer and lighter than air-dried clothes. The dryer does not cause any considerable wear of the fabric. The lint collected in the lint fi lter consists of dust and fabric fragments collected during the use of the laundry.
  • Page 22: Drying Process, Step By Step (1 - 7)

    DRYING PROCESS, STEP BY STEP (1 – 7) STEP 1: SORT THE FABRICS See chapter "ADVICES BEFORE DRYING" Empty the pockets. Coins, nails etc. could damage the machine and the fabric. STEP 2: TURN ON THE MAIN SWITCH. Turning on / Turning off Press the on/off button.
  • Page 23 STEP 4: CHOOSE THE DRYING PROGRAM. Choose the program by rotating the program selector knob in either direction. Confi rm the program selection by pressing the button under the program. Select the program based on the type and remaining moisture of the laundry you wish to dry. Anticipated program duration is indicated on the display.
  • Page 24 Program Max. kg* Description SILK AND WOOL This short program is intended for softening or fluffing of clothes made of wool and silk, which have to be dried thoroughly according to manufacturer s instructions. SHIRTS Use this program to dry shirts and blouses. Adjusted drum rotation prevents the laundry from creasing.
  • Page 25 STEP 5: CHOOSING THE PROGRAM SETTINGS Using the program settings, the drying programs can be further adjusted to your wishes. Some program settings may not be available for your selected program. Selected program settings will remain stored after the end of the drying cycle and may be changed subsequently (except for delayed start which is not stored after the drying is complete).
  • Page 26 Use the program selector knob to set Set Delay start the delay from 30 minutes to 6 hours in 30 min 1,5 h 30-minute steps, and then from 6 hours to 24 hours in 1-hour steps. Back Press the button under the selected time/duration to confi...
  • Page 27 Favourite programs /Add to fav? After the end of the drying program, Wash dried you can use the button 6 to store the program, including all extra settings, as Good ECO performance Start new Add to fav your favourite program. Auto extra Up to 6 favourite programs can be Save Program As Favourite...
  • Page 28 STEP 6: CLOSE THE DOOR AND START THE DRYING PROCESS. Close the dryer door and press the Start/Pause button. Start (pressed briefl y – start/resume) Pause (pressed briefl y – drying temporarily suspended) Cancel (press and hold the button for 3 seconds) Drying process (circle) is coloured: blue: beginning of the Drying cycle 00:26...
  • Page 29 To stop and cancel the drying program, press the Start/Pause button and hold it Preparing for program canceling. for 3 seconds. Cooling down. The selected program will be stopped and the cooling stage will begin. Cooling Program canceled. Garments can still be hot.
  • Page 30 STEP 7: END OF PROGRAM After the end of the drying program, the display will indicate that the drying has 00:00 Drying finished been fi nished ("Drying Finished"). Auto extra If you have selected the "anti-crease" option, the dryer will continue to operate Drying finished after the end of the drying cycle for the amount of time specifi...
  • Page 31: Settings

    SETTINGS In the main menu, use the program selector knob to select Settings. Confi rm the selection by pressing the Program Program Sports wear Conditioning Quick pro Time program Airing Settings Settings button 6. Then, use the program selector knob to scroll the list of settings that can be changed. •...
  • Page 32 Use the button to return to Settings. DISPLAY SETTINGS Set the brightness and logo display. Display settings ASKO Brightness Logo Display brightness Use the program selector knob or buttons to choose the brightness. Confi rm your selection with the button Logo under the logo display On/Off...
  • Page 33 CUSTOMIZE FAVORITES AND PROGRAMS The main menu includes the entire set of programs that you can choose using the program selector knob. This setting allows only displaying the selected program in the main menu. Use the program selector knob to select a program.
  • Page 34: Cleaning And Maintenance

    CLEANING AND MAINTENANCE Before cleaning, make sure to switch off the appliance and disconnect it from the power mains (unplug the power cord from the outlet). CLEANING THE DOOR NET FILTER IN THE DOOR Open the fi lter housing. Pull out the net fi lter. Gently scrape the fi...
  • Page 35 EMPTYING THE CONDENSATE TANK After each drying cycle, empty the condensate tank. If the condensate tank is overfl owing the drying program will be paused automatically. A warning will appear on the display unit that the condensate tank has to be emptied. (Disregard this warning if you fed the condensate discharge hose into a drain, siphon, or a sink.) Pull out the condensate tank from the dryer, then turn it upside down over a washbasin, sink, or any...
  • Page 36 CLEANING THE HEAT PUMP FILTER Do not touch the inner metal parts of the heat exchanger with bare hands. Danger of injury on sharp parts. Use appropriate protection gloves when cleaning the heat exchanger. Incorrect cleaning of the metal fi ns of the heat exchanger can permanently damage the tumble dryer. Do not press on the metal fi...
  • Page 37 Use a soft dry cloth to also clean the heat pump fi lter housing and net. Lower part of the hosing contains a strainer which shall be cleaned thoroughly. Clean the heat pump fi lter housing and net after every 10 drying cycles or if necessary. With automatic heat pump net fi...
  • Page 38 CLEANING THE STEAM GENERATOR TANK FILTER AND SELF-CLEANING SYSTEM Each time you empty the condensate tank, clean the steam generator tank fi lter and self-cleaning system as well. The fi lter is located in the tank housing (visible when the condensate tank is removed). Remove the condensate tank.
  • Page 39 EMPTYING THE STEAM GENERATOR TANK Before transporting a dryer that has been previously used, the steam generator tank must also be emptied. Otherwise, water from the tank may spill into the dryer interior. Move the dryer approximately 40 cm away from the wall and tilt it backwards.
  • Page 40 ADDITIONAL INFORMATION REGARDING CLEANING If you have inadvertently removed the entire net fi lter housing in the dryer door, reinstall it in the same position. Opening on the lower side of the door should occasionally be cleaned with a vacuum cleaner. If necessary, clean the fi...
  • Page 41 CLEANING THE APPLIANCE EXTERIOR Clean the appliance exterior and the display unit using a soft damp cotton cloth and water. Do not use solvents or abrasive cleaners that could damage the appliance (please observe the recommendations and warnings provided by the manufacturers of the cleaning agents). Wipe all parts of the dryer with a soft cloth until dry.
  • Page 42: Errors - What To Do

    ERRORS – WHAT TO DO? Disturbances from the environment (e.g. the power grid) may result in various error reports (see Troubleshooting table). In such case: • Switch off the appliance, wait for 1 minute, switch the appliance back on, and repeat the drying program. •...
  • Page 43 Problem/error Cause What to do? Laundry not dried • Filters are not clean. • Clean the filters (see chapter "CLEANING AND or drying takes too MAINTENANCE"). long. • Dryer is placed in a closed • Make sure there is adequate supply of fresh air room;...
  • Page 44 FAILURE DISPLAY In case of a failure while a program is in progress, the relevant Error X is indicated on the display unit. Press and hold the INFO button to Error display the error description. Error 3 Switch off the dryer and turn it back on. Info Errors indicated on the display unit (depending on the model) may include the following: Problem/...
  • Page 45 INFORMATION before, during, and after the program (depending on the model) Error indication on the display What to do? EN: Steam tank is empty. Please fill water. Fill the steam tank with distilled water or condensate. Pour the water through the steam tank filter located in the condensate tank housing.
  • Page 46: Servicing

    SERVICING BEFORE CALLING A SERVICE TECHNICIAN 1, 2, 3 See the chapters "TROUBLESHOOTING and "CLEANING AND MAINTENANCE" and see if you can resolve the problem yourself. When you contact a service centre, please state the model (1), type (2), and serial number (3) of your dryer.
  • Page 47: Technical Information

    TECHNICAL INFORMATION Information sheet pursuant to the Commission Regulation (EU) No. 392/2012 Model TD85.23XX Max. drying capacity 11 kg (See rating plate) Energy efficiency class Annual energy consumption 259,72 (kWh/year) Power consumption Automatic normal drying with maximum load (E 2,18 (kWh) Automatic normal drying with half load (E 1,16 (kWh) dry1/2...
  • Page 48 STANDARD TESTS For standard tests, the condensate drain hose should be connected to a drain. Europe Energy declaration EN 611 21 (392/2012). Program 3 (Auto normal dry) 11 kg; cotton, normal temperature. The appliance has been tested with 10A / 16A (depending on the model);...
  • Page 49: Program Table

    PROGRAM TABLE The table indicates the power consumption and time values for drying of a test batch of laundry with various loads and after spinning at various rates, consistently with the EN61121. The following requirements apply to the consumption values specifi ed below. Inlet air temperature room temperature Inlet air humidity...
  • Page 50 Program Conditioning 1000 0,32 0:40 1400 Quick Pro 0,47 0:59 Full load Partial load Small load * Due to deviations in terms of type and amount of laundry, spinning, power supply oscillation, and environment temperature and humidity, the values measured at the user may diff er from the one stated in the table.
  • Page 51: Disposal

    DISPOSAL Disposal / recycling of packaging Our product packaging is made of environmentally friendly materials that can be recycled, disposed of, or destroyed without any hazard to the environment. To this end, packaging materials are labelled appropriately. The symbol on the product or its packaging indicates that the product should not be treated as normal household waste.
  • Page 52 NOTES...
  • Page 53 NOTES...
  • Page 54 NOTES...
  • Page 55: Quick Guide

    QUICK GUIDE SORT THE FABRICS Sort the fabric by type and by how heavily soiled the laundry is. Observe the drying symbols on the laundry labels. Close the zippers, hook-and-loop fasteners and buttons. SWITCH ON THE MAIN ON/OFF SWITCH (ON/OFF) OPEN THE DRYER DOOR AND INSERT THE LAUNDRY.
  • Page 56 Gorenje, Partizanska 12, 3320 Velenje, Slovenija www.asko.com TD85.23 SPHP GP en (06-22)

Table of Contents