14
ELECTRICAL SYSTEM
14.9
Changing the headlight bulb
Note
Damage to reflector Reduced brightness.
–
Grease on the lamp will evaporate due to the heat and be deposited on the reflector. Clean the lamp and keep it free of grease before
mounting.
(Duke)
–
Position the headlight mask.
–
Mount and tighten screws
Guideline
Screw, headlight
Remaining screws, chassis
–
Check that the lighting is functioning properly.
B00972-11
(Duke R)
–
Position the headlight mask.
–
Mount and tighten screws
Guideline
Screw, headlight
Remaining screws, chassis
–
Check that the lighting is functioning properly.
602577-11
Finishing work
–
Check the headlight setting. (
2
.
EJOT
M5
2
.
EJOT
M5
p. 135)
131
2 Nm (1.5 lbf ft)
5 Nm (3.7 lbf ft)
2 Nm (1.5 lbf ft)
5 Nm (3.7 lbf ft)