Tuning The Engine; Setting The Engine Characteristics - KTM 690 Duke AUS/UK 2014 Owner's Manual

16

TUNING THE ENGINE

16.1

Setting the engine characteristics

Preparatory work
–
Switch off the ignition by turning the ignition key to the position
–
Remove the passenger seat. (
Main work
–
Pull off the Map‑Select switch with holder
–
Pull the Map‑Select switch out of the holder.
B00966-12
–
Turn the adjusting wheel until the desired number is aligned with marking
Set the Map‑Select switch to Soft.
–
Set the adjusting wheel to position 1.
Soft – Homologated performance with very gentle response
Set the Map‑Select switch to Advanced.
–
Set the adjusting wheel to position 2.
Advanced – Homologated performance with very direct response
Set the Map‑Select switch to Standard.
–
Set the adjusting wheel to position 3, 4, 5, 6, 7, 8, 9 or 0.
B00971-10
Standard – Homologated performance with balanced response
–
Position the Map‑Select switch in the holder.
–
Push the Map‑Select switch with the holder into the retaining bracket.
p. 79)
1
from the retaining bracket.
144
.
2
.