Asko T411HS W U Series Instructions For Use Manual page 42

FAILURE DISPLAY
In case of a failure while a program is in progress, the relevant Error X is indicated on the display unit.
Errors indicated on the display unit (depending on the model) may include the following:
Problem/ Error indication on the display
error
Error 0
Error 1
Error 2
Error 3
Error 4
Error 6
Error 7
Error 8
Error 9
42
Error 3
E0 - Please check user manuals or call service.
E1 - Thermistor fault. Please check user manuals or call service.
E2 - Please check user manuals or call service.
E3 - Pump failure. Please check user manuals or call service.
E4 - Please clean filters or call service.
E6 - Relay failure. Please check user manuals or call service.
E7 - Door failure. Please check user manuals or call service.
E8 - Button failure. Please check user manuals or call service.
E9 - PB/UI software versions are not compatible.
Customer Care Center, 1-800-898-1879, www.askona.com
Press and hold the INFO button to
Info Exit
display the error description.
Press the 6 EXIT button to return to
Main Menu.
5
Switch off the dryer and turn it back on.
What to do?
Control unit failure.
Call service centre.
Temperature sensor failure.
Call service centre.
Communication error.
Call service centre.
Failure on the pump for pumping the
condensate into the condensate tank
Call service centre.
Control unit failure.
Clean the filters. See chapter
"CLEANING AND MAINTENANCE" or
call service centre.
Control unit failure.
Call service centre.
Control unit failure.
Call service centre.
Control unit failure.
Call service centre.
Call service centre.