Related Manuals for Asko T411VD*W*U
Summary of Contents for Asko T411VD*W*U
-
Page 1: Tumble Dryer
INSTRUCTIONS FOR USE Tumble Dryer T411VD.W.U TD85.11XX T411VD.T.U Carefully read the instructions for use before using the dryer. -
Page 2: Table Of Contents
Dear Customer, We thank you for purchasing this quality ASKO product. We hope it meets all your expectations. Scandinavian design combines pure lines, everyday functionality, and high quality. These are the key characteristics of all our products, and the reason why they are highly appreciated across the globe. -
Page 3: Important Safety Instructions
16. The interior of the machine should be cleaned periodically by an authorized ASKO service agent. 17. Do not place items exposed to cooking oils in your dryer. Items contaminated with cooking oils may contribute to a chemical reaction that could cause a load to catch re. - Page 4 heat (cool down period). Avoid stopping a tumble dryer before the end of the drying cycle unless all items are quickly removed and spread out so that the heat is dissipated. 18. Clothes dryer installation must be performed by a quali ed installer. 19.
- Page 5 WARNING! - Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a quali ed electrician or service representative or personnel if you are in doubt as to whether the appliance is properly grounded. Do not modify the plug provided with the appliance (Canadian market only).
- Page 6 KIDSAFE™ CHILD SAFETY • WARNING! - Do not allow the children to play with the dryer. • Prevent your children and pets to enter the dryer drum. • Before closing the dryer door and running the program, make sure there is nothing except laundry in the drum (e.g.
-
Page 7: Dryer Description
DRYER DESCRIPTION Main switch (ON/OFF) Program selector knob 2 3 4 5 Display unit Program selector buttons Button (start/pause) Rating plate with information about the dryer (on the inside of the dryer door) QR and AUID code (on the inside of the dryer door) Dryer door Door net lter... -
Page 8: Before Using The Appliance For The First Time
BEFORE USING THE APPLIANCE FOR THE FIRST TIME PACKAGING Remove all packaging. Please sort the materials in compliance with local recommendations (see chapter "DISPOSAL"). CLEANING Disconnect the dryer from the power mains and open the door towards you. Clean the dryer drum with a damp cloth and a mild detergent. -
Page 9: Installation And Connection
INSTALLATION AND CONNECTION DRYER PLACEMENT Free-standing appliance The dryer can be either free standing or installed on The dryer may be placed adjacent to a washing top of a washing machine. machine. The dryer emits heat. Therefore, do not place it in If the friction between the dryer feet and the oor is a very small room, as the drying process may be not su cient, the dryer may move during operation. - Page 10 (A+B), supplied in the cardboard box in the dryer drum. Tipping guard part B is designed to t on ASKO washing machines and it may be hard or impossible to mount on appliances of other brands. If the...
- Page 11 How to stack a dryer onto the washing machine (ASKO): There is a cardboard box in the dryer drum, containing the vacuum feet and the tipping guard. The tipping guard consists of two metal parts (A + Use two screws to attach the A part to the back of the dryer.
- Page 12 CHANGING THE DOOR OPENING DIRECTION To change the direction of door opening, proceed as follows. Open the door fully. Undo the screws and remove the door. Use the screwdriver to remove the door lock cover and undo the screw on the door lock. Push the door lock upwards and remove it.
- Page 13 Undo the door hinge assembly (left) and the door latch assembly (right), switch their positions, and replace the screws (door hinge assembly to the right- hand side, door latch assembly to the left-hand side). Use the screwdriver to remove the plastic part more easily.
- Page 14 UL approved vent basket. Asko dryers have a "T-style" exhaust vent that allows you to connect the duct on the rear, on the left, or on the right...
- Page 15 Connecting to a ventilation duct To connect the exhaust duct to a ventilation You will need a UL-CSA-approved, 4-inch ridged outlet, follow the steps below: metal exhaust duct. If a exible duct is used, it must 1. Connect the exhaust duct to a ventilation exhaust comply with the Outline for Clothes Dryer Transition tting or to a discharge through the wall.
- Page 16 The dryer shall not be connected to the power The receptacle on the rear of the machine is mains using an extension cord. designed to accommodate ASKO washers ONLY (rated 208–240 V.) To use this receptacle, you must Do not connect the tumble dryer to an electrical use the ready tted plug supplied with the washing outlet intended for an electric shaver or hair dryer.
-
Page 17: Tips Before Drying
TIPS BEFORE DRYING This chapter includes several tips on how to prepare the laundry for drying. LAUNDRY SORTING Sort the laundry according to: • type, • fabric thickness. For the most even drying, make sure the laundry is made of a similar material. CLOTHING 1. - Page 18 LAUNDRY SYMBOLS Observe the laundry symbols: Wash cycle Tumble dry cycle Normal wash cycle Machine dry Permanent Press or Wrinkle Normal setting Resistant setting Permanent Press or Wrinkle Gentle/Delicate setting Resistant setting Hand wash only Gentle or Delicate setting Do not wash Do not tumble dry Do not wring.
- Page 19 MATERIALS (FABRICS) SUITABLE FOR Static electricity DRYING IN A TUMBLE DRYER To reduce the risk of static electricity in the Material is suitable for tumble drying. laundry after tumble drying, you can: Clothes dried in a tumble dryer will be softer and •...
-
Page 20: Drying Process
DRYING PROCESS WARNING! - To reduce the risk of electric shock or injury to persons, read the "IMPORTANT SAFETY INSTRUCTIONS" section before operating this appliance. STEP 1: SORT THE FABRICS See chapter "ADVICES BEFORE DRYING" STEP 2: TURN ON THE MAIN SWITCH. Turning on Press the on/off button. - Page 21 STEP 4: CHOOSE THE DRYING PROGRAM. Choose the program by rotating the program selector knob in either direction. The program selector knob can be used when arrows appear on the display. Select the program based on the type and remaining moisture of the laundry. Anticipated program duration is indicated on the display.
- Page 22 Program Max. kg* Description 12. TIME PROGRAM Use this program for non-sensitive laundry that is still slightly moist and has to be thoroughly dried. In the time program, remaining moisture is not detected automatically. If the laundry is still damp after the program is complete, repeat the program;...
- Page 23 STEP 5: CHOOSING THE PROGRAM SETTINGS Using the program settings, the drying programs can be further adjusted to your preferences. Some program settings may not be available for your selected program. Selected program settings will remain stored after the end of the drying cycle and may be changed subsequently (except for delayed start which is not stored after the drying is complete).
- Page 24 5. Timed drying First, use the program selector knob to select the Timed Dry program. Press the button 5 to select a drying time from 30 minutes to 4 hours, in 15-minute steps. Use the button 6 (OK) to con rm the Time 2:15 selected drying time.
- Page 25 STEP 6: CLOSE THE DOOR AND START THE DRYING PROCESS. Close the dryer door and press the Start/Pause button. Start (pressed brie y – start/resume) Pause (pressed brie y – drying temporarily suspended) Cancel (press and hold the button for 3 seconds) 2:20 Starting Remaining time...
- Page 26 STEP 7: END OF PROGRAM After the end of the drying program, the Start Cycle completed succsessfully display will indicate that the program has been successfully completed ("Cycle completed successfully"). If you have selected the "anti-crease" Anti creasing Cycle completed succsessfully option, the dryer will continue to operate after the end of the drying cycle for the amount of time speci ed upon selection...
- Page 27 Favourite programs After the end of the drying program, Start Cycle completed succsessfully you can use the button 6 to store the program, including all extra settings, as your favourite program. Up to 4 favourite programs can be Make your list of four own favourite programs. stored.
-
Page 28: System Settings
SYSTEM SETTINGS In the main menu, use the program Enter System settings selector knob to select System Settings. Con rm the selection by pressing the button 2. Then, use the program selector knob to scroll the list of settings that can be changed. •... - Page 29 PROGRAMS The main menu includes the entire set of programs that you can choose using the program selector knob. This setting allows only displaying the selected program in the main menu. Press the button 1 for to appear. Use Programs Sports wear Info Back...
- Page 30 RESET This means that all settings will return to the default settings and your own settings will be deleted. Con rm the selection by pressing the Reset Info Back button 3 (YES). Press the button 6 to return to System Settings.
-
Page 31: Cleaning And Maintenance
CLEANING AND MAINTENANCE Before cleaning, make sure to switch o the appliance and disconnect it from the power mains (unplug the power cord from the outlet). CLEANING THE DOOR NET FILTER IN THE DOOR Open the lter housing. Pull out the net lter. Gently scrape the lter to remove the lint lining ( bres and threads). - Page 32 ADDITIONAL INFORMATION REGARDING CLEANING If you have inadvertently removed the entire net lter housing in the dryer door, replace it in the same position. Opening on the lower side of the door should occasionally be cleaned with a vacuum cleaner. If necessary, clean the lter housing and door gasket as well.
- Page 33 CLEANING THE APPLIANCE EXTERIOR Wipe the dryer exterior using a soft damp cotton cloth and mild detergent. Do not use any cleaning agents that could damage the dryer (please observe the recommendations and warnings provided by the manufacturers of the cleaning agents). Wipe all parts of the dryer with a soft cloth until dry.
-
Page 34: Troubleshooting
TROUBLESHOOTING Disturbances from the environment (e.g. the power grid) may result in various error reports (see Troubleshooting table). In such case: • Switch o the appliance, wait for 1 minute, switch the appliance back on, and repeat the drying program. •... - Page 35 Problem/error Cause What to do? Laundry not dried • Filters are not clean. • Clean the filters (see chapter "CLEANING AND or drying takes too MAINTENANCE"). long. • Dryer is placed in a closed • Make sure there is adequate supply of fresh air room;...
- Page 36 FAILURE DISPLAY In case of a failure while a program is in progress, the relevant Error X is indicated on the display unit. Press and hold the INFO button to Error 3 Info EXIT display the error description. Press the 6 EXIT button to return to Main Menu.
- Page 37 INFORMATION before, during, and after the program (depending on the model) Error indication on the display What to do? EN: Steam tank is empty. Please fill water. Fill the steam tank with distilled water or condensate. Pour the water through the steam tank filter located in the condensate tank housing.
-
Page 38: Service And Guarantee
ASKO Products must 7. Repairs to parts or systems resulting from be led with ASKO within two (2) years from date of unauthorized modi cations made to the ASKO purchase. Service will be provided during normal Product. - Page 39 TYPE: TDXX.XXXXX MODEL: XXXXXX.X DAMAGES AND IN NO EVENT FOR DAMAGES Art.No.: XXXXXX/XX Ser.No.: XXXXXXXX IN EXCESS OF THE PRICE PAID FOR THE ASKO X kg XXX V ~ XXXX W PRODUCT AS TO WHICH A CLAIM IS MADE. Some jurisdictions do not allow the exclusion or...
- Page 40 Limited Warranty, please contact ASKO Customer Care at 1-800-898-1879. After your purchase and prior to rst use of the ASKO Product, register your ASKO Product with ASKO by utilizing the address information below. Should you need...
-
Page 41: Technical Information
TECHNICAL INFORMATION TECHNICAL INFORMATION Height 845 mm Width 597 mm Depth 755 mm Weight (net) 45 kg Drum volume 145 l Maximum drying load See rating plate Speed 50–55 rpm Rated power See rating plate Drum material Stainless steel Housing material Hot-dip galvanized and powder coated sheet metal, or stainless steel sheet Placement/installation... -
Page 42: Program Table
PROGRAM TABLE The table indicates the power consumption and time values for drying of a test batch of laundry with various loads and after spinning at various rates, consistently with the EN61121. The following requirements apply to the consumption values speci ed below. Inlet air temperature room temperature Inlet air humidity... -
Page 43: Disposal
DISPOSAL Disposal / recycling of packaging Our product packaging is made of environmentally friendly materials that can be recycled, disposed of, or destroyed without any hazard to the environment. To this end, packaging materials are labelled appropriately. The symbol on the product or its packaging indicates that the product should not be treated as normal household waste. - Page 44 NOTES Customer Care Center, 1-800-898-1879, www.askousa.com...
- Page 45 NOTES Customer Care Center, 1-800-898-1879, www.askousa.com...
- Page 46 NOTES Customer Care Center, 1-800-898-1879, www.askousa.com...
-
Page 47: Quick Guide
QUICK GUIDE SORT THE FABRICS Sort the fabric by type and by how heavily soiled the laundry is. Observe the drying symbols on the laundry labels. Close the zippers, hook-and-loop fasteners and buttons. SWITCH ON THE MAIN ON/OFF SWITCH ON/OFF OPEN THE DRYER DOOR AND INSERT THE LAUNDRY. - Page 48 www.askousa.com TD85.11 SPO US/CA en (04-18)