Setting The Clock; Timer Function - Samsung MM-J430D User Manual

Basic Functions

Setting the Clock

For each step, you have a few seconds to set the
required options. If you exceed this time, you must
start again.
1. Switch the system on by pressing the
POWER ( ) button.
2. Press the TIMER CLOCK button and then
press the v button.
Result: "CLOCK" is displayed.
3. Press the v button.
Result: The hour flashes.
`
Decrease the hours:
$
`
Increase the hours:
4. When the correct hour is displayed, press the
v button.
Result: The minutes flashes.
`
Decrease the minutes:
`
Increase the minutes:
5. When the correct minute is displayed, press
the v button.
Result: " TIME" appears in the display.
` The current time is now set.
| NOTE |
You can display the time, even when you are using
\
another function, by pressing the TIMER CLOCK
button once.

Timer Function

The timer enables you to switch the system on or
off at specific times automatically.
Before setting the timer, check that the current time is
\
correct.
For each step, you have a few seconds to set the
\
required options. If you exceed this time, you must
start again.
If you no longer want the system to switch on or off
\
automatically, you must cancel the timer by pressing
the TIMER ON/OFF button.
Example: You wish to wake up to music every
morning.
1. Switch the system on by pressing the
POWER ( ) button.
|
22
English
%
%
$
2. Press the TIMER CLOCK button and then
press the ▲ or ▼ buttons until
displayed.
3. Press the v button.
Result: ON is displayed for a few seconds, you
can set the timer switch-on time.
4. Set the timer switch-on time.
Press the $ or % button.
a
b Press the v button.
Result: The minutes flash.
Press the $ or % button.
c
d Press the v button.
Result: OFF is displayed for a few
seconds, you can now set the
timer switch-off time.
5. Set the timer switch-off time.
Press the $ or % button.
a
b Press the v button.
Result: The minutes flash.
c Press the $ or % button.
d Press the v button.
Result: VOL XX is displayed, where XX
corresponds to the volume already
set.
6. Press $ or % button to adjust the volume level
and press the v button.
Result: The source to be selected is displayed.
7. Press the $ or % button to select the desired
source to be played when the system switches on.
` FM (radio) : a Press the v button.
b Select a preset station by
press the $ or % button.
` DVD/CD (compact disc): Load one audio CD.
USB : Connect the USB device.
`
8. Press the v button.
Result: CHKREC (Do you want to record?) is
displayed.
9. Press the v button.
Result: REC N is displayed, you can press the $
or % button to select the REC Y or REC N, and
then press v button.
1). If you select the REC N, it will cancel tuner
timing recording even if you have already set
the tuner timing recording.
TIME is