Table of Contents
Advertisement
Timer Function
The timer enables you to switch the system on or off at
specific times.
Example: You wish to wake up to music every morning.
If you no longer want the system to be switched on or off
automatically, you must cancel the timer.
Before setting the timer, check that the current time is correct.
For each step, you have a few seconds to set the required
options. If you exceed this time, you must start again.
1
Switch the system on by pressing On/Standby.
2
Press Timer/Clock until
3
Press Enter.
Result: ON TIME is displayed (instead of the equalizer symbols) for
a few seconds, followed by any switch-on time already set;
you can set the timer switch-on time.
4
Set the timer switch-on time.
a
Set the hour by tuning the Moving Jog knob to the right or to the left.
b
Press Enter.
Result: The minutes flash.
c
Set the minutes by tuning the Moving Jog knob to the right or to
the left.
d
Press Enter.
Result: OFF TIME is displayed (instead of the equalizer symbols)
for a few seconds, followed by any switch-off time already
set; you can now set the timer switch-off time.
5
Set the timer switch-off time.
a
Set the hour by tuning the Moving Jog knob to the right or to the left.
b
Press Enter.
Result: The minutes flash.
c
Set the minutes by tuning the Moving Jog knob to the right or to
the left.
d
Press Enter.
Result: VOL XX is displayed, where XX corresponds to the
volume already set.
6
Press Preset/Manual Down and Up to adjust the volume level and
press Enter.
Result: The source to be selected is displayed.
7
Turn the Moving Jog knob to select the source to be played when
the system switches on.
If you select...
TAPE (cassette)
TUNER (radio)
CD (compact disc)
8
Press Enter to confirm the timer.
9
Press On/Standby to set the system to standby mode.
Result:
is displayed to the bottom left of the time, indicating that
the timer has been set. The system will switch on and off
automatically at the required times.
TIMER is displayed.
You must also...
Insert a recorded cassette in one of
the decks before setting the
system to standby.
a Press Enter.
b Select a preset station by tuning
the Moving Jog knob to the right
or to the left.
a Load one or more compact discs.
b Select the required disc.
If the timer switch on and off times are identical, the word ERROR is
displayed.
On/
Standby
Timer/
Clock
2
PTY
1,9
RDS
R
Display
Demo
AUX
Band
TUNER
Mute
Mono/ST
Program
Preset
Memory
CD Repeat
Phones
CD
REC/Pause
Shuffle
Synchro
Push Eject
To set the timer function
You may use Moving Jog or
4, 5, 6, 7.
You can also use Program/Set button on the remote control to
instead Enter button in step 3, 4, 5, 6, 7, 8.
Power Surrou
Volume
CD
TAPE
Sound
Mode
3,4,5,6,7,8
Enter
Enter
Reverse
4,5,7
Mode
Counter
Deck 1/2
Reset
6
6
Dubbing
Normal
High
P
Preset/Manual
/
buttons to adjust in step
21
GB
Push Ejec
Hide quick links:
Advertisement
Table of Contents
