Tape; Listening To A Cassette; Cd Synchro Record Feature; Recording A Compact Disc - Samsung MAX-L82 Instruction Manual

Listening to a Cassette

GB
Always treat your cassettes with care; refer, if necessary, to
the section entitled "Precautions When Using Audio Cassettes"
on page 25.
1
Switch the system on by pressing the On/Standby button.
2
Select the TAPE function by pressing TAPE on the front panel.
3
Open either cassette deck 1 or 2 by pushing and releasing the deck
cover where Push Eject ( ) is written.
4
Insert the pre-recorded cassette with the open edge of the tape
facing downward.
5
Close the deck by pushing on it until it clicks into place.
Result: Depending on the deck selected, the 1 or 2 indication is
displayed in front of the counter number.
6
If you have inserted two cassettes, press Deck 1/2 on the front panel
or directly the Deck 1/2 button on the remote control to select the
cassette to be played.
Result: Depending on the deck selected, the TAPE 1 or TAPE 2
indication is displayed.
7
To listen to...
Side A
Side B
Result: The cassette starts playing.
8
To...
Listen to the track of
your choice
Stop the playback or search
If there are very quiet passages on a track, the automatic
search function may stop before the end of the track. Also, a
very short space between two tracks may not be detected.
9
When the cassette is stopped, select one of the following functions
as required.
To...
Rewind the cassette
Fast-forward the cassette
On/
Standby
Timer/
Clock
PTY
1
RDS
R Display
Demo
AUX
Band
TUNER
Mute
Mono/ST Program
Preset
Memory CD Repeat
Phones
REC/Pause
Shuffle
Push Eject
18
Press ...

TAPE (

TAPE (
Press...
or the appropriate
number of times
Press ...
2,7
CD TAPE
TAPE
Enter
Reverse
Mode
Counter
Deck 1/2
Reset
8,9
6
CD
Dubbing
Synchro
Normal High
Preset/Manual
Preset/Manual

CD Synchro Record Feature

You can record a compact disc on a cassette in two different ways:
Synchronised recording
Direct recording
This feature enables you to synchronize the start of the
recording with the start of the disc or track of your choice.
1
Switch the system on by pressing On/Standby.
2
Insert a blank cassette in Deck 2.
3
Select the CD function by pressing CD on the front panel.
4
Load a compact disc.
5
Select the required disc.
6
Select the required track and press CD Synchro or press CD
Synchro directly to start recording at the beginning of the disc.
Result:
7
To stop recording, press
On/
Standby
Timer/
Clock
PTY
1
RDS
R Display
Demo
AUX
) once
) twice
Mute
Mono/ST
Preset
Memory
Phones
REC/Pause
Push Eject

Recording a Compact Disc

The direct recording mode enables you to start recording with
any track on the compact disc.
You can only record on cassettes in Deck 2.
You do not need to adjust the volume, as it has no effect on the recording.
1
Switch your system on by pressing On/Standby.
2
Insert a blank cassette in Deck 2.
3
Select the CD function by pressing CD on the front panel.
4
Load the compact disc.
5
Select the required disc.
Volume
6
Select the required track on the compact disc and press
or on the remote control to set the compact disc player to Pause mode.
7
Press the REC/Pause.
Result:
8
Press the
Result: The track is recorded on the cassette.
Sound
Mode
9
To stop recording, press
On/
Standby
Timer/
Clock
8,9
8
PTY
1
RDS
R Display
Demo
AUX
Mute
Mono/ST
Preset
Memory
Phones
REC/Pause
Push Eject
REC is displayed in red and recording starts.
.
3
Band
TUNER CD
CD
Enter
Reverse
Program
Mode
Counter
6
CD Repeat Deck 1/2 Reset
7
CD
Dubbing
Shuffle Synchro
Normal High
Preset/Manual Preset/Manual
REC is displayed in red and recording starts.
to start playing the track.
.
3,6,8
Band
TUNER CD
CD
Enter
Reverse
Program Mode
Counter
7
CD Repeat Deck 1/2 Reset
9
CD
Dubbing
Shuffle Synchro
Normal High
Preset/Manual
Preset/Manual
Volume
TAPE
Sound
Mode
Push Eject
on the front panel
Volume
TAPE
Sound
Mode
Push Eject