Checking Or Changing Programmed Tracks; Tuner; Searching For And Storing The Radio Stations - Samsung MAX-L82 Instruction Manual

Checking or Changing Programmed
Tracks
GB
You can check or change your selection of tracks at any time.
1
Press once if you have started listening to the selection.
2
Press Program.
Result: The following indications are displayed:
(CH = Check, 01=Program No, DI = Disc No, – – = Track No on the disc)
If you have already programmed 24 tracks, CH is displayed
instead of PR when you press Program.
3
Press Program again.
Result: The first track selected is displayed, together with the letter CH (Change).
4
Press Program one or more times until the track to be changed is displayed.
5
If necessary, press the corresponding Disc (1, 2, 3) button to change discs.
6
Press and
7
Press Program to confirm your change.
8
Press CD ( ) to start listening to the selection.
Result: The first track selected is played.
On/
Standby
Timer/
Clock
PTY
RDS
R Display
Demo
AUX
Band

TUNER

2,3,4,7
Mute
Mono/ST Program
Preset
Memory CD Repeat
Phones
REC/Pause Shuffle
Push Eject
Deck 1/2
1
6
14
or turn Moving Jog to select a different track.
Disc 1 Disc 2 Disc 3 Disc Change
Disc 1 Disc 2 Disc 3
5
8
CD
CD TAPE
Enter
Reverse
Mode
Counter
Deck 1/2 Reset
CD
Dubbing 6
Synchro 6
Normal High
Preset/Manual
Preset/Manual
1
Sound Program
Disc Skip AUX
Mode /Set
Repeat
2,3,4,7
Mono/ST. TUNER
CD
Band
Tape
8
CD
VOL.
6
Tuning
Mode
CD CD CD CD
VOL.
Searching for and Storing the Radio
Stations
You can store up to:
15 FM stations
8 MW stations
7 LW stations
1
Switch the system on by pressing On/Standby.
2
Select the TUNER function by pressing TUNER.
3
Select the required frequency band by pressing TUNER (Band)
again on the front panel or TUNER (Band) on the remote control.
Result: The appropriate indication is displayed:
4
To search for a
station...
Manually
Automatically
5
Select the station to be stored by:
Turning the Moving Jog knob to the right or to the left to increase
or decrease the frequency respectively
or
Pressing Tuning
Open/Close
To scroll through the frequencies faster when searching
manually, hold down the Preset/Manual Down or Up buttons.
The automatic search procedure may stop on a frequency that
does not correspond to a radio station. If this happens, use the
Power Surround
manual search mode.
Volume
6
Adjust the volume by:
Turning the Volume knob on the front panel
or
Pressing the VOL. + or – buttons on the remote control
7
Select the stereo or mono mode by pressing Mono/ST.
Sound
Mode
On/
Standby
Timer/
Clock
PTY
1
RDS
R Display
Demo
Push Eject AUX
Mute
Mono/ST
Preset
Memory
Phones 7
REC/Pause
Push Eject
FM Frequency Modulation
AM(MW) Medium Wave
LW Long Wave
Press Preset/Manual on the front panel
or Tuning Mode on the remote control
One or more times until MANUAL is
displayed.
One or more times until AUTO is
displayed.
or on the remote control
2,3
Band
TUNER TUNER CD
Enter
Reverse
Program Mode
Counter
5 CD Repeat Deck 1/2 Reset
5
CD
Dubbing
Shuffle Synchro
Normal High
4
Preset/Manual
Preset/Manual
VOL.
4
Tuning
Tuning
Mode
Mode
CD CD
CD
CD
5
VOL.
Power Surround
6
Volume Volume
TAPE
Sound
Mode
Push Eject
5