Timer Function - Samsung MM-VB7 Instruction Manual

Timer Function

The timer enables you to switch the system on or off at
specific times.
Example: You wish to wake up to music every morning.
If you no longer want the system to be switched on or off
automatically, you must cancel the timer.
Before setting the timer, check that the current time is correct.
For each step, you have a few seconds to set the required
options. If you exceed this time, you must start again.
1
Switch the system on by pressing Standby/On (
2
TIMER is displayed.
Press Timer/Clock until
3
Press Program/Set.
Result: ON TIME is displayed (instead of the equalizer symbols) for a
few seconds, followed by any switch-on time already set; you
can set the timer switch-on time.
4
Set the timer switch-on time.
a Set the hour by pressing
b Press Program/Set.
Result: The minutes flash.
c Set the minutes by pressing
d Press Program/Set.
Result: OFF TIME is displayed (instead of the equalizer symbols)
for a few seconds, followed by any switch-off time already
set; you can now set the timer switch-off time.
5
Set the timer switch-off time.
a Set the hour by pressing
b Press Program/Set.
Result: The minutes flash.
c Set the minutes by pressing
d Press Program/Set.
Result: VOL 10 is displayed, where 10 corresponds to the
volume already set.
6
Press or button to adjust the volume level and press
Program/Set.
Result: The source to be selected is displayed.
7
Press or button to select the source to be played when the
system switches on.
If you select...
TAPE (cassette)
TUNER (radio)
CD (compact disc)
8
Press Program/Set to confirm the timer.
) .
or button.
or button.
or button.
or button.
You must also...
Insert a cassette tape.
a Press Program/Set.
b Select a preset station by pressing
, (remote control) or ,
.
(main unit)
Load a compact disc.
9
Press Standby/On ( ) to set the system to standby mode.
Result: is displayed to the upside left of the time, indicating that
the timer has been set. The system will switch on and off
automatically at the required times.
If the timer switch on and off times are identical, the word
ERROR is displayed.
You can use the
/
/ button in step 4,5,6,7.
1,9
4,5,6,7
button on the main unit to instead
2
3,4,5,6,7,8
4,5,6,7
21
GB