Selecting A Stored Station; Improving Radio Reception - Samsung MAX-L82 Instruction Manual

Searching for and Storing the Radio
Stations (continued)
8
If you do not want to store the radio station found, revert to Step 4
and search for another station.
Otherwise:
a Press Preset/Memory.
Result: The PRGM is displayed for a few seconds.
b Press Preset/Manual Down and Up to assign a program number
between 1 and 15.
c Press Preset/Memory to store the radio station.
Result: PRGM is no longer flashed and the station is stored.
9
To store any other radio frequencies required, repeat Steps 3 to 8.
The PROGRAM function can be used to assign a new station
to an existing program number.
You can also use Program/Set botton on the remote control
to instead Preset/Memory button in step 8.
Enter
Mute
Mono/ST Program
Preset
Memory CD Repeat
Phones
8
8
REC/Pause Shuffle
P
Preset/Manual
Push Eject
In Tuner mode
In manual tuning mode, you can use Moving Jog or
button to manual search a radio station.
During Tuner auto searching, press
searching.
In Preset tuning mode, you can use Moving Jog or
button to search a stored radio station.
Reverse
Mode
Counter
Deck 1/2
Reset
8
CD
Dubbing
Synchro
Normal High
/
button to stop auto
/

Selecting a Stored Station

You can listen to a stored radio station as follows:
1
Switch the system on by pressing On/Standby.
2
Select the TUNER function by pressing TUNER (Band) on remote control.
3
Select the required frequency band by pressing TUNER (Band) on
the remote control or TUNER (Band) again on the front panel.
4
Press the Preset/Manual button on the front panel of the unit, or the
Tuning Mode button on the remote control until "PRESET" is
displayed.
5
Turning Moving Jog on the front panel left or right until the desired
station is found or press
or
Select the desired station by pressing the station number stored,
using the Tuning or
Result: The desired station is now received.
1
On/Standby Timer
On/Off Mute
Sound Program
Mode Disc Skip /Set AUX
2,3
Repeat
Deck 1/2 Mono/ST. TUNER
CD
Band
Tape
CD

Improving Radio Reception

You can improve the quality of radio reception by:
Rotating the FM or AM(MW) aerial
Testing the positions of the FM and AM(MW) aerials before fixing them
permanently
If reception from a specific FM radio station is poor, press Mono/ST.
to switch from stereo mode to mono. The quality of the sound will be
improved.
On/Standby
Sound
Mode Disc Skip
Repeat
Deck 1/2
CD
/ to select the desired station.
button on the remote control.
CD
Band
Tape
CD
5
5
4 VOL.
VOL.
Tuning Tuning
Mode Mode
CD CD CD CD
VOL. VOL.
Timer
On/Off Mute
Program
/Set AUX
Mono/ST. TUNER
Band
Tape
CD
GB
15