Connecting To An External Source; Cd Digital Out Jack; Connecting The Loudspeakers - Samsung MAX-L82 Instruction Manual

Connecting to an External Source

GB
The auxiliary input can be used to take advantage of the
sound quality of your mini-compact system when listening to
other sources.
Examples: A television
A video disc player
A Hi-Fi stereo video cassette recorder
To connect the external source, the source must have an audio
output. In addition, you need an RCA connection cable.
1
Set the system to standby mode and disconnect it and the external
source from the main.
2
Connect the audio cable to the rear of the mini-compact system.
Connect the...
Red jack
White jack
For optimum sound quality, do not invert the right and left
channels.
3
Plug the system back into the main socket and press On/Standby to
switch it on.
4
Select the AUX source by pressing AUX.
Result: AUX is displayed.
5
Switch the external source on.
6
Adjust the volume and balance as required:
Volume Equalizer
Example: You can watch a film and take advantage of stereo sound
provided that the original sound track is in stereo (as if you
were in a cinema).

CD Digital Out Jack

This unit can output CD digital sound signals through this
jack. Use an optical cable to connect digital audio equipment.
(DAT deck, MD recorder, etc.).
Remove the dust cap (1) from the CD DIGITAL OUT jack. Then,
connect an optical cable plug to the CD DIGITAL OUT jack.
When the CD DIGITAL OUT jack is not being used
Attach the supplied dust cap.
8
To the connector marked...
R (right)
L (left)
DIGITAL
OUT
(OPTICAL)
R L
AUX IN
(1)

Connecting the Loudspeakers

The loudspeaker connector terminals are located on the rear
of the system.
1
Press and hold the clamp of the speaker terminal on the rear of the
unit.
2
Insert the end of the speaker cord into the terminal.
Match the polarity (colors): Red (+) to red (+) and black (–) to black (–).
3
Release the finger from the clamp.
Use only speakers with the same speaker impedance as indicat-
ed by the speaker terminals on the rear of the unit.
<MAX-L82>
<MAX-WL85>
Speaker Cord
(Red/Black)
Speaker Cord
(Blue/Black)
Match the polarity (colors): Blue (+) to blue (+) and black (–) to
black (–); Red (+) to red (+) and black (–) to black (–).
Directions in Installing Speaker
Installation in a place near heating apparatus, under direct lay of light or
with high humidity may cause performance degradation of the speaker.
Do not install on the wall or on a high place of pole or other unstable
place to prevent any safety accident caused by falling of the speaker.
Do not take the speaker apart from TV or computer monitor.
The speaker near the TV or computer monitor may influence the quality
of the screen display.
SPEAKER(6 )
R L
SUBWOOFER(4 )
R L
MAIN
SPEAKER(8 )
R L