Table of Contents
Advertisement
Description
[ Remote Control ]
POWER button
TV/VIDEO, FUNCTION button
SLEEP button
TUNER button
NEO : 6 button
DISPLAY button
MODE button
EXTERNAL DEVICE PLAYBACK button
MUTE button
VOLUME CONTROL button
MENU button
ANALOG/DIGITAL button
Direct Function Select button
Number(0~9) buttons
7
TV Indicator
VCR Indicator
AV RECEIVER Indicator
DVD Indicator
MODE button
MO/ST button
SUBWOOFER button
SFE MODE button
EX/ES button
EFFECT button
TUNER MEMORY button
TUNING/CHANNEL button
SPEAKER LEVEL button
STEREO button
MOVE/SELECT button
SPEAKER SETUP button
TEST TONE button
SPEAKER DISTANCE button
RDS Selection button
Insert Remote Batteries
1
2
Remove the battery
Insert two 1.5V AAA
cover on the back of
batteries, paying
the remote by
attention to the correct
pressing down and
polarities (+ and –).
sliding the cover in
the direction of the
arrow.
Follow these precautions to avoid leaking or cracking batteries:
•
Place batteries in the remote control so they match the polarity:(+) to (+)and (–)to (–).
Caution !
•
Use the correct type of batteries.Batteries that look similar may differ in voltage.
•
Always replace both batteries at the same time.
•
Do not expose batteries to heat or flame.
Range of Operation of the Remote Control
The remote control can be used up to approximately 23
feet/7 meters in a straight line. It can also be operated at
a horizontal angle of up to 30° from the remote control
sensor.
3
Replace the battery
cover.
To open the remote control cover,
push the top of the cover, then slide
downward.
8
Advertisement
Table of Contents
