Connecting External Component; Connecting The Fm Antenna - Samsung AV-R700 Instruction Manual

Digital surround av receiver system
Hide thumbs Also See for AV-R700:
Table of Contents

Advertisement

Connecting External Component

Connecting Audio Component/ 5.1 Channel
Before moving or installing the product, be sure to turn off the power and disconnect the power cord.
CD Player
DIGITAL
AUDIO
OUT
OUT
R
L
CENTER
R
R
L
L
SUB
FRONT
SURR.
WOOFER
DVD or 5.1 Channel Player
13
Connecting the FM and AM
Antennas
If AM reception is poor, connect an
outdoor AM antenna(not supplied).
FM Antenna (supplied)
FM antenna connection
1. Connect the FM antenna supplied to the FM
75ΩCOAXIAL terminal as a temporary mea-sure.
2. Slowly move the antenna wire around until you find
a location where reception is good, then fasten it to
a wall or other rigid surface.
The cooling fan dissipates the heat generated inside the unit so that the unit can
COOLING FAN
be operated normally. The cooling fan is activated automatically to supply cool air
to the unit.
Please observe the following cautions for your safety.
Make sure the unit is well-ventilated. If the unit has poor ventilation, the temperature inside the
unit could rise and may damage it.
Do not obstruct the cooling fan or ventilation holes. (If the cooling fan or ventilation holes are
covered with a newspaper or cloth, heat may build up inside the unit and fire may result.)
AM Loop Antenna
(supplied)
Snap the tabs on the loop into the
slots of the base to assemble the
AM loop antenna.
AM antenna connection
1. Connect the AM loop antenna supplied to the AM
and terminals.
2. If reception is poor, connect an outdoor single vinyl-
covered wire to the AM ter-minal. (Keep the AM loop
antenna con-nected).
14

Advertisement

Table of Contents
loading

Table of Contents