Remote Control Unit - Samsung DTB-S500F Instructions For Use Manual

DESCRIPTION

Remote Control Unit

N N o o t t e e : When inserting batteries, make sure that the polarity(+/-) is correct.
GB-10 D i g i t a l T e r r e s t
1. POWER Puts the STB in stand-by mode (no signal to TV).
Button's color is gray.
2. 0-9 Numeric key Enter numeric value and to select the channel directly by entering
number on the Service list.
3. TEXT This key is used to select the teletext mode.
4. BACK This key is used in the MHP Application.
5. MUTE This key is used to toggle between normal & muted audio.
6. EXIT Exit a menu or return to the previous menu.
7. VOL+/VOL- These keys are used to increase or decrease the volume.
8. CH+/CH- These keys are used to change channels.
9. Color key (RED, GREEN, YELLOW, BLUE)
Used to select special operation for the STB.
10. Arrow Key Move the highlight bar for the MHP Application.
OK Enter and confirm any data to the receiver in the menu system.
11. APP This key is the hard key for accessing the SAMSUNG application manager.
12. LIST Press while viewing TV and a list of channels is displayed.
13. MENU This key is used to open up the menu or return to the previous menu.
i
14. " " Button is the "Now and Next Information" Key.
15. EPG Electronic Program Guide button displays the TV/Radio Program guide.
16. TV/RADIO Toggle between the TV and Radio channel.
17. ALT This key is used to select the soundtrack/videotrack list for the current
service.
18. SUB Reserved.
r i a l R e c e i v e r
DESCRIPTION
GB-11