CONTROL PANEL (OPTION)
For dual engine
For quadruple engine (PORT)
For quintuple engine (PORT)
For sextuple engine (STBD)
NOTE:
• On a boat equipped with quadruple engines,
use control panel for quadruple engine
(PORT) and control panel for quadruple
engine (STBD).
• On a boat equipped with quintuple engines,
use control panel for quintuple engine
(PORT) and control panel for quintuple
engine (STBD).
• On a boat equipped with sextuple engines,
use control panel for sextuple engine (PORT)
and control panel for sextuple engine
(STBD).
54
For triple engine
For quadruple engine (STBD)
For quintuple engine (STBD)
For sextuple engine (PORT)
Start & Stop Switch
This is a switch to start and stop the engine.
The engine can be started with the remote con-
trol handle at the neutral position.
[
] (UP) & [
] (DOWN)
The "Power Trim and Tilt" is operated by press-
ing the switch. To tilt the motor up, press the
[
]
switch. To tilt the motor down, press the
[
]
switch.
NOTE:
The tilt up and tilt down switches cannot be acti-
vated when the power off.